584000
94
Zoom out
Zoom in
Previous page
1/124
Next page
Page 5-12 400 SERIES INSTALLATION MANUAL
Page Rev L P/N 190-00140-02
SELECTED COURSE
Select 150° on the CDI/HSI that is connected to the 400 Series VOR/LOC/GS OBS inputs. The
SELECTED COURSE field should indicate near to 150° and a Calibrate to 150°? field appears.
Selecting this field calibrates the 400 Series to match the input source. Verify OBS operation by checking
that the course displayed on the 400 Series is within 2° of the selected course. Do this at 30° intervals
around the OBS card.
DME CHNL MODE
This configuration allows you to set the format for DME tuning data output.
Selection Description
King Serial
King Serial DME tuning data (not operational for MAIN software versions
2.02 and lower).
Parallel 2x5
2 of 5 parallel DME tuning.
Parallel BCD
Shifted BCD (Binary Coded Decimal) parallel DME tuning (not operational
for MAIN software versions 2.02 and lower).
Parallel slip
Slip-code parallel DME tuning (not operational for MAIN software versions
2.02 and lower).
Narco 890/891
2 of 5 parallel DME tuning, compatible with the following DME units:
Narco DME 890
Narco DME 891
ARC (Cessna) RTA-476A
5.2.14 VOR/LOC/GS ARINC 429 CONFIG Page (GNS 430 Only)
Select the VOR/LOC/GS ARINC 429 CONFIG Page (see
Figure 5-16). This page configures the VOR/ILS ARINC
429 output and input ports.
SPEED
Selection Description
Low
Standard low-speed ARINC 429 (nominally 12.5 kilobits per second)
High
High-speed ARINC 429 (nominally 100 kilobits per second)
SDI
Selection Description
Common
Common VOR/ILS receiver (only 429 data with SDI=0 is used)
VOR/ILS 1
Number 1 (Pilot) VOR/ILS receiver. Only 429 data with SDI=0 or SDI=1 is
used.
VOR/ILS 2
Number 2 (Copilot) VOR/ILS receiver. Only 429 data with SDI=0 or SDI=2
is used.
DME MODE
Selection Description
Directed freq 1
If the GNS 430 is connected to a multi-channel ARINC 429 DME, channel 1
of that DME is tuned. “Directed freq 1” should be selected if a single-
channel ARINC 429 DME is tuned.
Directed freq 2
If the GNS 430 is connected to a multi-channel ARINC 429 DME, channel 2
of that DME is tuned.
Figure 5-16. VOR/LOC/GS ARINC 429
CONFIG Page
94


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GNC 420 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GNC 420 in the language / languages: English as an attachment in your email.

The manual is 4,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info