584000
96
Zoom out
Zoom in
Previous page
1/124
Next page
Page 5-14 400 SERIES INSTALLATION MANUAL
Page Rev L P/N 190-00140-02
5.2.18 TRAFFIC Page
(Only if 400 Series unit configured for BFG Skywatch or Ryan TCAD interfaces)
Select the TRAFFIC Page (see Figure 5-20). This page
shows the BFG Skywatch or Ryan TCAD modes of
operation and current traffic situation.
For BFG Skywatch, this page shows:
1. The altitude mode—below (BLW), normal (NORM),
above (ABV), or unrestricted (UNR)
2. The operating mode—standby (STBY) or operating
(OPER)
3. Current altitude (ALT)
4. Altitude limits being imposed (LIM A and LIM B)
5. Heading, and barometric (BARO) and radio (RAD) altitude status.
For BFG Skywatch (see Figure 5-20), verify that the 400 Series unit can change the Skywatch operating
mode (STBY or OPER). In standby mode, verify that the Skywatch may be placed in self-test mode by
highlighting “Test Mode?” and pressing ENTER on the 400 Series unit. Refer to the BFG Skywatch
installation manual for system checkout.
For Ryan TCAD (see Figure 5-21), this page shows the
current shield mode and altitude. Verify that the TCAD
shield mode may be changed—Ground (GND), Terminal
(TML), Standard (STD), En Route (ENR), or Unrestricted
(UNR), and that the TCAD is reporting the correct altitude.
Refer to the Ryan TCAD installation manual for system
checkout.
5.2.19 RYAN TCAD CONFIG Page
(Only if 400 Series unit configured for Ryan TCAD interface)
Select the RYAN TCAD CONFIG Page (see Figure 5-22).
This page shows the TCAD’s current shield settings for the
selected mode, approach mode status, volume, mute status,
mute duration, voice alert selection, and system status.
Verify that the TCAD system status is GREEN. Also,
verify that shield settings and volume, mute duration, and
voice alert selection can be modified. Verify that changes
in mute (if a mute switch is installed) are shown. Refer to
the Ryan TCAD installation manual for system checkout.
5.2.20 GAD 42 CONFIG Page
(Only if 400 Series unit configured for GAD 42 interface)
Select the GAD 42 CONFIG Page (see Figure 5-23). This
page allows remote configuration of a GAD 42 Interface
Adapter Unit. For details of this function, please refer to
Section 5 of the GAD 42 Installation Manual (P/N 190-
00159-00).
Figure 5-20. TRAFFIC Page (Skywatch)
Figure 5-21. TRAFFIC Page (TCAD)
Figure 5-22. RYAN TCAD CONFIG
P
Figure 5-23. GAD 42 CONFIG Page
96


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GNC 420 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GNC 420 in the language / languages: English as an attachment in your email.

The manual is 4,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info