522211
11
Zoom out
Zoom in
Previous page
1/32
Next page
Fishfinder 160C Owner’s Manual 7
INSTALLATION INSTRUCTIONS > TRANSDUCER INSTALLATION
Testing the Transom Mount Installation
Perform this test after you install the Fishfinder. Because you need
water to carry the sonar signal, the Fishfinder does not function
properly with the transducer out of the water. When you place your
boat in the water, CHECK FOR LEAKS around the screw holes that
are below the water line. DO NOT leave your boat in the water for
an extended period of time without checking for leaks.
To test the transom mount installation:
1. Begin testing the installation at a slow speed. If the sonar
appears to be working properly, gradually increase the boat’s
speed observing the sonar’s operation. If the sonar signal
suddenly is lost or the bottom return is severely degraded,
note the speed at which this occurs.
2. Return the boat to the speed at which the signal was lost.
Make moderate turns in both directions and see if the signal
improves.
3. If the signal strength improves while turning, adjust the
transducer so that it extends another 1/8" below the transom
of the boat. It might take several adjustments to eliminate the
degradation.
4. If the signal does not improve it may be necessary to move
the transducer to a different location.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin Fishfinder160C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Fishfinder160C in the language / languages: English as an attachment in your email.

The manual is 2,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info