501751
9
Zoom out
Zoom in
Previous page
1/20
Next page
records include your fastest time over a standard distance,
longest ride, and most ascent gained during a ride.
Restoring Your Personal Records
You can revert a personal record back to the previous saved
record.
1
From the home screen, select > Personal Records.
2
Select .
3
Select a record, and select .
NOTE: This does not delete any saved activities.
Training Zones
Heart rate zones (page 5)
Power zones (page 6)
Speed zones (page 5)
Setting Your Speed Zones
Your device contains several different speed zones, ranging
from very slow to your maximum speed. The values for the
zones are default values and may not match your personal
abilities. You can customize your zones on the device or using
Garmin Connect.
1
From the home screen, > Training Zones > Speed.
2
Select a zone.
You can enter a custom name for the zone.
3
Enter the minimum and maximum speed values.
4
Repeat steps 2–3 for each zone.
ANT+ Sensors
Your device can be used with wireless ANT+ sensors. For more
information about compatibility and purchasing optional
sensors, go to http://buy.garmin.com.
Putting On the Heart Rate Monitor
NOTE: If you do not have a heart rate monitor, you can skip this
task.
You should wear the heart rate monitor directly on your skin,
just below your breastplate. It should be snug enough to stay in
place during your activity.
1
Snap the heart rate monitor module
À
onto the strap.
2
Wet both electrodes
Á
on the back of the strap to create a
strong connection between your chest and the transmitter.
3
If the heart rate monitor has a contact patch
Â
, wet the
contact patch.
4
Wrap the strap around your chest, and connect the strap
hook
Ã
to the loop.
The Garmin logo should be right-side up.
5
Bring the device within range (3 m) of the heart rate monitor.
After you put on the heart rate monitor, it is on standby and
ready to send data.
TIP: If the heart rate data is erratic or does not appear, you may
have to tighten the strap on your chest or warm up for 5–10
minutes.
Setting Your Heart Rate Zones
The device uses your user profile information from the initial
setup to determine your heart rate zones. You can manually
adjust the heart rate zones according to your fitness goals
(page 5). For the most accurate calorie data during your
activity, set your maximum heart rate, minimum heart rate,
resting heart rate, and heart rate zones.
1
From the home screen, select > Training Zones > Heart
Rate.
2
Enter your maximum, minimum, and resting heart rate
values.
The zone values update automatically, but you can also edit
each value manually.
3
Select Based On:.
4
Select an option:
Select BPM to view and edit the zones in beats per
minute.
Select % Max. to view and edit the zones as a percentage
of your maximum heart rate.
Select % HRR to view and edit the zones as a percentage
of your resting heart rate.
About Heart Rate Zones
Many athletes use heart rate zones to measure and increase
their cardiovascular strength and improve their level of fitness. A
heart rate zone is a set range of heartbeats per minute. The five
commonly accepted heart rate zones are numbered from 1 to 5
according to increasing intensity. Generally, heart rate zones
are calculated based on percentages of your maximum heart
rate.
Fitness Goals
Knowing your heart rate zones can help you measure and
improve your fitness by understanding and applying these
principles.
Your heart rate is a good measure of exercise intensity.
Training in certain heart rate zones can help you improve
cardiovascular capacity and strength.
Knowing your heart rate zones can prevent you from
overtraining and can decrease your risk of injury.
If you know your maximum heart rate, you can use the table
(page 14) to determine the best heart rate zone for your
fitness objectives.
If you do not know your maximum heart rate, use one of the
calculators available on the Internet. Some gyms and health
centers can provide a test that measures maximum heart rate.
Installing the GSC 10
NOTE: If you do not have a GSC 10, you can skip this task.
Both magnets must be aligned with their respective indication
lines for the Edge to receive data.
1
Place the GSC 10 on the rear chain stay (on the side
opposite the drive train).
2
If necessary, place the flat rubber pad
À
or the triangle-
shaped rubber pad between the GSC 10 and the chain stay
for stability.
ANT+ Sensors 5
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin Edge 510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Edge 510 in the language / languages: English as an attachment in your email.

The manual is 3,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin Edge 510

Garmin Edge 510 User Manual - German - 22 pages

Garmin Edge 510 User Manual - Dutch - 22 pages

Garmin Edge 510 User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info