724657

Gardenline YR-HT250 Manual

12
Zoom out
Zoom in
Previous page
1/19
Next page
25cc 4 Stroke Petrol Hedge Trimmer
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. YR-HT250 • 10/2017 • 52742
(toll free)
AFTER SALES SUPPORT
(toll free)
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. YR-HT250 • 10/2017 • 52742
25cc 4 Stroke Petrol Hedge Trimmer
20 21
Use of the Petrol Hedge Trimmer
• Use safety equipment. Always wear eye protection. Safety equipment
such as a dust mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce personal injuries.
• This product requires the use of two hands to ensure safe operation.
Rotate the rotating handle (13) to the most comfortable operating
position.
• If unfamiliar with trimming techniques, practice the procedures with the
engine in the “OFF” position.
• Always clear your work area of debris such as cans, bottles, rocks, etc.
Striking objects can cause serious injury to the operator or bystanders
and also damage equipment. If an object is accidentally hit, immediately
turn o the engine and examine the equipment. Never operate the unit
with damaged or defective parts.
• Do not operate the hedge trimmer with other people or animals in the
immediate vicinity.
• If you are operating it on a slope, stand below the cutting attachment.
Do not operate on a slope or hill if there is the slightest chance of slipping
or losing your footing.
• Do not use this equipment for purposes other than trimming shrubs,
hedges, or bushes.
• Never operate the hedge trimmer without a properly functioning muer
and spark plug cover installed.
• Ensure that the blade cover is removed before starting the hedge
trimmer.
• Never operate the hedge trimmer unless it is properly assembled and in
good working condition.
• Start the engine only when you are close to the working area.
• Always trim or cut at high engine speeds. Do not run the engine slowly at
the start or during trimming operations.
• Place yourself in a well-balanced position, stable on both feet.
3. To slow the hedge trimmer, release the throttle trigger (11) (Fig P) to
obtain the desired speed. To return the engine to the idle speed and
completely disengage the blades (1), release the throttle trigger (11)
completely.
NOTE: Before you can operate the throttle trigger (11), you MUST
depress the safety lever (12)
The Operation of the Rear Rotating Handle
1. The rear rotating handle (13) can turn left or
right 90° (Fig R).
2. The rear rotating handle (13) can only be
adjusted when the machine is running at
idling speed or in the o position however, it
is recommended to adjust the rear rotating
handle (13) while the hedge trimmer is o.
3. To adjust the handle to either the left or the
right, push down on the rear rotating handle
locking lever (14) (Fig S), and whilst pushed
down, rotate the handle to the desired left or
right position (Fig T).
4. When the handle is in position, release the rear
rotating handle locking lever (14). You will hear
a click when the locking lever has re-engaged
NOTE: The hedge trimmer can only be used in
the 3 preset positions of the rear handle.
DO NOT use the rotating handle if the handle
has not fully engaged in the pre set location .
S.
T.
R.
180°
ROTATION
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardenline YR-HT250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardenline YR-HT250 in the language / languages: English as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info