724644

Gardenline FCS4800A Manual

17
Zoom out
Zoom in
Previous page
1/20
Next page
47.1cc Petrol Chainsaw
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. 61705 • 08/2018 • FCS4800A
(toll free)
AFTER SALES SUPPORT
(toll free)
e-mail: help@powertoolsupport.com1800 909 909
47.1cc Petrol Chainsaw
MODEL: №. 61705 • 08/2018 • FCS4800A
30 31
WARNING: The chain has sharp edges.
Use work gloves for safety.
Vents:
1 . Clean any dust away from the cooling vents as
clogged vents can cause overheating.
Servicing
• It is recommended once you rst use your product to get it serviced after
15 hours of use.
• From thereafter, service the product every 2 years, or every 50 hours of
use if frequently used.
• A 3mm hex key (36) is supplied for the purpose of future maintenance /
servicing.
Always t the chain and bar cover (31) when the chainsaw is not in use.
It is recommended to drain BOTH fuel and oil from the chainsaw on the
completion of use, prior to storage or transportation.
Always sit the chainsaw on a surface where the leakage of oil will not be
a problem. The chainsaw is tted with an oil pump and there will be after
use an amount of oil in the oil channels inside the chainsaw, and also in the
chain and bar channel. This oil can spill on to the surface the chainsaw is
sitting as it drains from the above points.
Always store the chainsaw in an area safe away from the elements of the
environments, i.e. high humidity, wet locations, hot environments etc.
Storage area should also be out of reach of children of both the chainsaw
and all accessories.
Store the chainsaw ensuring the bar cover securely covers the chain (20)
and guide bar (19). The chainsaw should always be stored with the On/O
switch (4) in the ‘O’ position and the chain brake (13) ON.
If the chainsaw is to be stored for a long period of time it is advisable to
apply a thin spray of oil over the chain (20), guide bar (19) and all exposed
metal parts.
The chainsaw should be thoroughly cleaned of all wood chips, dirt etc prior
to storage. A chainsaw carry bag (38) is supplied with this chainsaw.
Place the chainsaw with the bar cover (31) installed, into the chainsaw bag,
and secure the zip. Carry it safely using either the shoulder strap or by
securing the velcro carry handle.
AU.
Air Filter:
1. Remove the air lter cover (15) by rotating the
air lter knob (16) in an anti-clockwise direction,
and removing the air lter cover (15) (Fig AM).
2. Disconnect the black pipe from the cylinder
cover (Fig AQ), and then also from the air lter
itself.
3. Grasp the sides of the air lter (14) and pull it
outwards (Fig AR).
4. Dry particles can be removed by tapping on a
hard surface. More stubborn dirt may require
washing the air lter (14) with warm soapy
water and a soft brush.
5. After thoroughly drying the air lter (14),
re-install the black pipe onto the air lter from
where it was removed, and re-insert the air
lter back in place. Re-attach the black pipe
back onto the cylinder cover, and ensure all is
secure in place. Replace the air lter cover (15),
and secure the air lter knob (16) in a clock wise
direction to secure the air lter cover (15) back
in place.
Guide Bar:
1. Take o the guide bar (19) and maintain it by
removing any sawdust from the groove in the
guide bar (Fig AS).
2. Make sure that the oil port is not clogged. Oil
the nose sprocket at the tip of the guide bar (19)
(Fig AT).
3. Check for fuel and oil leakage and loose
fastenings, especially those securing the
handles and the guide bar (19).
If any defects are found, take the tool to an
authorised Service Agent.
4. A bar cover (31) is supplied with this chainsaw
and should be tted over the chain (20) and
guide bar (19) whenever the chainsaw is not
being used. This includes immediately after use,
transportation and service where possible.
The chain teeth are extremely sharp and could
create a safety hazard if the bar cover (31) is not
tted. Furthermore, the bar cover (31) provides
protection to the chain cutting edge when the
saw is not in use (Fig AU).
AS.
AR.
AQ.
AT.
Maintenance Maintenance
Transportation and Storage
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardenline FCS4800A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardenline FCS4800A in the language / languages: English as an attachment in your email.

The manual is 1,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info