724644
16
Zoom out
Zoom in
Previous page
1/20
Next page
47.1cc Petrol Chainsaw
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. 61705 • 08/2018 • FCS4800A
(toll free)
AFTER SALES SUPPORT
(toll free)
e-mail: help@powertoolsupport.com1800 909 909
47.1cc Petrol Chainsaw
MODEL: №. 61705 • 08/2018 • FCS4800A
28 29
4. Check for oil on the electrodes and clean o any excess.
5. Use a soft wire brush to clean up carbon build up on spark plug
electrodes.
Replace the spark plug or reset the electrode gap to 0.6-0.7mm.
Replacement spark plugs can be purchased from your local Lawnmower
or small engine store, or from https://help.tools/
Chain Sharpening
WARNING: Always ensure the engine is turned o before
undertaking this task.
Sharpen the chain regularly to maintain optimum performance of the
chainsaw.
Signs of a dull chain are:
The sawdust becomes powder-like
Extra force is required to execute a cut
The cut does not track in a straight line
Increased vibration
Increased fuel consumption
WARNING: Wear heavy gloves when handling the chain.
Hold the guide bar (19) securely in a vice.
Sharpen each cutter using the supplied
sharpening le (34). Always use outward strokes.
(Fig AP)
After sharpening, the cutters must all have the
same width and length. After every 3 - 4 times use
a repair centre to professionally sharpen your saw
chain. They have the special tools necessary to
ensure the correct cutting angles and depths
are even.
Guide Bar Wear
Reverse the guide bar (19) every 8 working hours to ensure uniform wear.
Check the bar rails frequently and if necessary remove burrs and square-up
the rails using a at le.
A P.
NOTE: This product is not suitable for repair or maintenance work by the
unskilled person. The following detail explains how the product is cleaned, and
basic maintenance / safety checks.
All other maintenance work must be carried out by service agents who are
experienced with both the mechanical and electrical aspects of this product.
NOTE: Before cleaning your chainsaw or carrying out any maintenance
procedures, make sure that the engine is o and is cool.
NOTE: Failure to maintain the following parts may result in reduced engine
performance.
Disconnect the spark plug (17) to prevent accidental starting. Maintenance
should be performed before and after each use. If the chainsaw is dropped
or appears to suer any other signicant impact, it is highly recommended to
perform all maintenance tasks before operation, and if there appears to be an
issue, refer to the troubleshooting chart, or take to an authorised service agent.
Changing/replacing the Spark Plug
Regularly check the spark plug (17) for wear and any build-up of carbon on the
electrodes. Spark plugs should be replaced every 10-15 hours of use.
1. Remove the air lter cover (15) by rotating the air lter knob (16) in an anti-
clockwise direction, and removing the air lter cover (15). (FigAM).
WARNING: To avoid damage to the spark plug lead, ensure you hold
the rubber cap and not by the lead itself.
2. Remove / pull o the black rubber spark plug cover (17) cap from the spark
plug (Fig AN).
3. To remove spark plug (17) use the supplied combination tool (Spark Plug
Spanner / Bar Nut Tube Spanner/ Flat Blade Screwdriver) (32) and turn in an
anti-clockwise direction to remove (Fig AO).
Maintenance Chain sharpening
AM. AN. AO.
Maintenance
LOOSEN
TIGHTEN
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardenline FCS4800A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardenline FCS4800A in the language / languages: English as an attachment in your email.

The manual is 1,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info