584522
7
Zoom out
Zoom in
Previous page
1/16
Next page
4. OPERATION
4.1. Basic Programming
Date and Time (Time Key)
You can end the programming mode at any time
by pressing the Time key.
Setting the date and time:
You must set the date and time before you can
set the watering programs. The day of the week is
selected automatically using the date. When the
Time key is pressed, all the valves are closed as
aprecaution.
1. [ Fig. O1 ]: Plug in the power supply unit – or –
press the Time key.
YEAR YEAR and date-year flash in the display.
2. [ Fig. O1 ]: Select the date-year using the
- keys (e. g. 20102010) and confirm by pressing
the OK key.
MONTH MONTH and date-month flash.
3. [ Fig. O2 ]: Select the date-month using the
- keys (e. g. 0505) and confirm by pressing the
OK key.
DAYDAY and date-day flash.
4. [ Fig. O3 ]: Select the date-day using the
- keys (e. g. 2323) and confirm by pressing
the OK key.
TIMETIME and time-hours flash.
5. [ Fig. O4 ]: Select the time-hours using the
- keys (e. g. 12 12 hours) and confirm by pressing
the OK key.
TIMETIME and time-minutes flash.
6. [ Fig. O5 ]: Select the time-minutes using the
- keys (e. g. 30 30 minutes) and confirm by
pressing the OK key.
[ Fig. O6 ]: The date and time have been set and
the main level is displayed.
Watering Programs (Channel Key)
Prerequisite: The date and time have been set.
To give you a better overview, we recommend that
before starting to enter the watering data you enter
the data for your valves into the watering plan in the
appendix of these operating instructions.
You can save 3 watering programs for each channel
(a maximum of 3 programs x 4 (Art. 1283) /
6 (Art. 1284) channels = 12 (Art. 1283) /
18 (Art. 1284) programs).
Ending the programming mode prematurely:
You can exit the programming mode prematurely at
any time.
v Press the Channel key twice.
The main level is displayed.
Setting the watering programs:
PLEASE NOTE!
If two programs overlap on one channel, this
results in the total watering duration being
less than planned. If two programs overlap
on different channels, the water pressure
may drop to an extent such that watering is
inadequate or the pop-up sprinklers fail to
extend.
v Make sure that the watering times of the
programs do not overlap.
Selecting the channel and program memory
location:
1. [ Fig. O7 ]: Press the Channel key.
SELECT CHANNELSELECT CHANNEL and the channel flash.
You can end the programming mode at any time by
pressing the Channel key.
2. [ Fig. O8 ]: Select the channel using the -
keys (e. g. channel 2) and confirm by pressing
the OK key.
Channel appears on the display (e. g. 2) and
Select Program and the program memory
location flash.
3. [ Fig. O9 ]: Select the program memory location
using the - keys (e. g. program memory
location 3) and confirm by pressing the OK key.
Start Time and the hours for the watering start
time flash.
Setting the watering start time:
4. [ Fig. O10 ]: Select the hours for the watering
start time using the - keys (e. g. 1616) and
confirm by pressing the OK key.
Start Time Time and the minutes for the water-
ing start time flash.
5. [ Fig. O11 ]: Select the minutes for the watering
start time using the - keys (e. g. 3030) and con-
firm by pressing the OK key.
Run Time and the hours for watering duration
flash.
Setting the watering duration:
(This always corresponds to 100 % Run Time)
6. [ Fig. O12 ]: Select the hours for watering dura-
tion using the - keys (e. g. 1 1 hour) and confirm
by pressing the OK key.
Run Time and the minutes for watering duration
flash.
16
EN
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardena 4030 - 1283 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardena 4030 - 1283 in the language / languages: English as an attachment in your email.

The manual is 1.26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gardena 4030 - 1283

Gardena 4030 - 1283 User Manual - German - 18 pages

Gardena 4030 - 1283 User Manual - Dutch - 17 pages

Gardena 4030 - 1283 User Manual - French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info