584522
5
Zoom out
Zoom in
Previous page
1/16
Next page
2. FUNCTION
Keypad [ Fig. F1 ]:
! Time key: Selects date and time.
" Channel key: Calls the channels.
§ Man. key: Manually opens / closes
individual channels.
$ % Run Time
key: Calls up the % Run Time
function.
% Rain Off key: Selects a watering break.
& - keys: Changes data already entered.
(If you press and hold down the
- keys you can change data
in the quick run-through mode.)
/ OK key: Confirms the settings you
selected using the - keys.
Watering Controller display [ Fig. F2 ]:
( Date and time display:
Indicates the day of the week, date and
current time.
) Status display:
Indicates the current programming or watering
status.
= % Run Time display:
Sets the duration of watering between
10 – 200 % for all channels.
QKey lock:
Protects against unintentional changing of
settings (the reset function cannot be locked).
WBattery status display:
When the Low Battery display flashes,
the battery is almost empty and has to be
replaced.
When the Low Battery display appears,
the battery is empty or no battery has been
inserted.
The Low Battery display is re-set once the
new battery has been inserted.
E Sensor display:
If the sensor is inserted, the DRY or WET status
report appears. When WET is displayed the
watering programs are disabled.
R Program / channel display:
Indicates which program of the particular
channel is being programmed. If a channel
is currently open, the frame of the opened
watering channel flashes.
T Display of watering times:
Indicates the start time and duration of
watering.
Z Manual watering display:
When manual watering is selected,
Run Time Man. is displayed.
U Watering cycles / watering days:
To display the watering cycles (24h every day,
2nd every 2nd day, 3rd every 3rd day,
Odd every odd day, Even every even day)
or the programmed watering days
(Mo, Tu, We, Th, Fr, Sa, Su).
3. INITIAL OPERATION
CAUTION!
The Watering Controller is ruined if the
power supply unit is connected to terminals
other than the 24 V AC terminals!
v Connect the power supply unit to the
24 V AC terminals only!
Connecting your Watering Controller
[ Fig. I1 / I2 ]:
Before programming your Watering Controller,
install a 9 V battery to prevent loss of data if
apower failure occurs.
1. Release snap lock 1 and open cover 2.
2. Connect the cable of the power supply unit to
the 24 V AC terminals.
3. Connect the cables for the valves (e. g. 7-wire
GARDENA Connection Cable Art. 1280 for
up to 6 valves) to the terminals for the channels
(CHANNELS 1 …) and C (see also
Connecting the valves).
4. If required, connect the sensor (e. g. GARDENA
Moisture Sensor Art. 1867) using the accom-
panying adapter cable M and connect the latter
to the SENSOR terminals.
5. If necessary connect the cable for the master
channel to the MASTER terminals (see Master
channel).
14
EN
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardena 4030 - 1283 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardena 4030 - 1283 in the language / languages: English as an attachment in your email.

The manual is 1.26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gardena 4030 - 1283

Gardena 4030 - 1283 User Manual - German - 18 pages

Gardena 4030 - 1283 User Manual - Dutch - 17 pages

Gardena 4030 - 1283 User Manual - French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info