Manual Gardena 4030 - 1283 (page 6 of 16) (English)

584522

Zoom out

Zoom in

1/16

6. Remove the empty battery as necessary:

Depress the clip - (the battery is released)

and remove the empty battery.

7. Attach the battery 3 to the battery clip 4 and

insert it into the battery compartment 5.

8. Close cover 2 and let snap lock 1 engage.

9. Plug the mains plug of the 24 V (AC) power sup-

ply unit into a mains socket.

After this it is necessary to set the date and time

(see 4. OPERATION Setting the date and

time).

Master Channel:

To connect the master valve:

The master channel M is activated, as soon as

avalve is activated.

You can connect a central valve upstream of the

other valves to act as a master valve.

Connecting the valves [ Fig. I3 ]:

The example shows the connection of 2 valves

Art. 1278 in the Valve Box Art. 1255 to the

Watering Controller 4030 / 6030. As the output

ofthe Watering Controller is 24 V AC (alternating

current) for switching the valves, it is does not

matter which of the two cables of a valve is

inserted into C.

Labelling the valves:

! Label the valves (1 – 6), so that the channels

(CHANNELS 1, CHANNELS 2, …) of the

Watering Controller can be clearly assigned

to the valves.

Connecting the valves to the Valve Box:

" Connect one cable of the valve V1 to the cable

terminal 1 of the valve box.

§ Connect the other cable of the valve V1 to

acable terminal C of the valve box.

(All 4 cable terminals C are interconnected

and equivalent to one another).

$ Connect one cable of the valve V2 to the cable

terminal 2 of the valve box.

% Connect the other cable of the valve V2 to

acable terminal C of the valve box.

Other valves can be connected similarly to V1

and V2.

Connecting the Watering Controller to the

Valve Box:

& Connect a cable terminal C of the Watering

Controller to a cable terminal C of the valve

box. Both cable clips C are connected to each

other and equivalent.

/ Connect the cable terminal of channel 1

CHANNELS 1 to the cable terminal 1 of the

valve box.

( Connect the cable terminal of channel 2

CHANNELS 2 to the cable terminal 2 of the

valve box.

Other channels can be connected similarly

to CHANNELS 1 and CHANNELS 2.

Cable cross-section of the connection

cable:

The maximum permissible distance between the

Watering Controller and the valve depends on the

cross-section of the connection cable. For a dis-

tance of 30 m, the cross section is 0.5 mm2 and

0.75 mm2 for a distance of 45 m. No more than

3valves must be in operation at the same time.

The GARDENA connection cable Art. 1280 is

0.5mm2 in size and is 15 m long. Up to 6 valves

can be connected using this cable. The connec-

tion cable can be connected so that it is water-

tight using the cable clip Art. 1282.

Wall-mounting the Watering Controller

[ Fig. I4 ]:

The two screws (not supplied) for attaching the

Watering Controller have to be screwed into place

80 mm apart and the screw head diameter must

not exceed 8 mm.

1. Screw the screws 6 into the wall 80 mm apart.

2. Attach the Watering Controller.

3. Release snap lock 1 and open cover 2

(see Connecting your Watering Controller) and

mark hole for screw 6 of the elongated hole 7.

4. Screw the screw 6 into the elongated hole 7

for fixation.

5. Close cover 2 and let snap lock 1 engage.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gardena 4030 - 1283 in the language / languages: English as an attachment in your email.

The manual is 1.26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gardena 4030 - 1283

Gardena 4030 - 1283 User Manual - German - 18 pages

Gardena 4030 - 1283 User Manual - Dutch - 17 pages

Gardena 4030 - 1283 User Manual - French - 18 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gardena 4030 - 1283 Manual

Product: