Manual Gaggia RI9301 Gaggia Baby (page 16 of 78) (English, German, Dutch, French, Italian, Portuguese, Spanish)

544803

Zoom out

Zoom in

1/78

ENGLISH

• 14 •

8 Place one or two espresso cups on the drip plate to line

up with the spouts of the ﬁ lter holder. Depress hot water/

brew switch (2) to pos. “On”. Espresso will start to ﬂ ow

into cups.

9 When cups are 3/4 full, release brew switch to “Off”.

Coffee will be as strong as the quantity of dispensed

water.

The more water you allow to ﬂ ow, the weaker the coffee.

When properly made, the espresso will have a light brown

foam “crema” ﬂ oating on the top.

If not, refer to “In the event of faulty function”.

10 Remove cups and serve.

11 To make more espresso, carefully and slowly remove the

ﬁ lter holder by moving handle to the left. Be careful as

hot water will be on top of the coffee grinds in the holder.

Some water will continue to drip from brewing head as

ﬁ lter holder is removed. That is normal and due to the

pump pressure in the system. Knock out used coffee

grinds from ﬁ lter. For more espresso repeat steps 6 to

10 above

Using Coffee Pods

To use coffee pods, remember to only use the “Perfect crema”

pod ﬁ lter (10).

N.B.: If present, remove the "Perfect crema" ﬁ lter for ground

coffee (11).

1 Follow the procedure described in section “Prepara-

tion”.

2 Insert the frothing jet device (13) into the ﬁ lter holder

(9). Then, insert the "Perfect crema" pod ﬁ lter (10).

3 Insert the ﬁ lter holder (9) into the brew group (14) from

the bottom and wait for it to heat up.

4 Place a container under the ﬁ lter holder (9). Preheat the

ﬁ lter holder by placing the hot water/brew button (2)

on “on” (this operation is only necessary for

the ﬁ rst coffee).

Water will start coming out.

5 Once 150 cc of water have been dispensed, bring the hot

water/brew button (2) onto “off”.

6 After the warming phase, remove the ﬁ lter holder (9) and

insert the pod; make sure the paper of the pod does not

overhang the ﬁ lter holder.

7 Insert the ﬁ lter holder into the machine with a 45°

movement towards the left.

8 Rotate it onto the right to tighten it into position. The ﬁ lter

holder handle shall be perpendicular to the machine or

slightly tilted towards the right.

9 Place a cup under the ﬁ lter holder. Place the hot water/

brew button (2) on “on”. Coffee will start coming out.

10 When the cup is 3/4 ﬁ lled, bring the brew button onto

“off”.

Remove the cup and serve.

11 To brew more coffee, slowly remove the ﬁ lter holder with

caution, moving it towards the left. Make sure to not get

burnt with the water from coffee grounds. Once the ﬁ lter

holder has been removed, some water will still drop.

This is due to the water pressure in the system. Remove

the grounds from the ﬁ lter. To brew more coffee, repeat

the procedure from step 6 to 10.

Important note: Filters should be kept clean to

guarantee perfect results. Clean daily after use.

If you experience a malfunction in the coffee brewing

process, leave the Filters in a metal container of hot

boiling water for 10 minutes, then rinse them in running

water and perform another brewing.

For a deeper cleaning of the ﬁ lters, we recommend using

the cleaning tablets speciﬁ cally designed to maintain the

efﬁ ciency of the machine.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gaggia RI9301 Gaggia Baby in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gaggia RI9301 Gaggia Baby Manual

Product: