544803
18
Zoom out
Zoom in
Previous page
1/78
Next page
ENGLISH
• 16 •
7 NOTE: If you want to make espresso immediately
after making hot water, the temperature of the machine
boiler must be brought down to a brewing temperature.
Otherwise, espresso may taste “burned”.
To do this: place an empty cup on drip plate. Do not insert
lter holder. Put the hot water/brew switches (2) and the
steam switch (4) to “On”, letting cup fi ll with water.
Turn brew switch “Off.
You may now proceed to make espresso.
Keeping it clean:
1 IMPORTANT: the steam nozzle should be cleaned after
each use in order to avoid build up of milk deposits that
are very dif cult to clean. Cleaning is made easy as can
be seen in the DESCRIPTION OF PARTS. The outer
part of nozzle can be removed by pulling downward.
The outside of the steam pipe can be cleaned with a damp
cloth.
The steam jet is cleaned by running a shot of steam
through it.
The hole in the steam nozzle must be kept open. A needle
may be used.
2 Clean fi lter holder and fi lter in warm water after use.
3 Wipe body of machine with a damp cloth as required.
4 Remove basin and grid (12, 23) and rinse with water. Do
not use abrasive substances.
5 Clean the seal (15) inside of the brewing head (14) and
keep it clean.
6 The shower disc (17) should be unscrewed and cleaned
periodically depending on frequency of use.
7 If the machine is not used for a long period of time,
discharge the water from the boiler by turning the steam
knob clockwise (25), and put the hot water/coffee switch
on “On”. Let a quantity of water equal to two cappuccino
cups come out of the frother. Close the steam knob (25)
and put the hot water/coffee and the steam switch on
“Off. Turn off the machine.
Never operate pump unless there is water in tank.
8 NOTE: It is very normal for an espresso machine to emit
steam and drip occasionally as the water pressure changes
during use.
Be certain to empty drip tray (12) as required.
Descaling
Limescale normally builds up with the use of the appliance.
The machine needs descaling every 1-2 months (if used)
and/or whenever a reduction in water fl ow is noticed. Use
the GAGGIA descaling product only.
NOTE: In case of con ict, priority must be given to what is
indicated in the operation and maintenance manual over
the instructions provided on separately sold accessories
and materials.
NOTE: Use the GAGGIA descaling
product only. Its formula has been
designed to ensure better machine
performance and operation for its
whole operating life. If correctly
used, it also avoids alterations in
the brewed product. The descaling
solution is to be disposed of
according to the manufacturer’s
instructions and/or regulations in
force in the country of use.
NOTE: Never drink the descaling solution or any products
dispensed until the cycle has fi nished. Never use vinegar
as a descaling solution.
Pay attention
as the Turbo-Frother
steam nozzle could be hot!
Air intake to be kept clean and
free from residues.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggia RI9301 Gaggia Baby at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggia RI9301 Gaggia Baby in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info