• Connect the appliance to the electricity. Check
the appliance is working correctly before sealing.
• Seal the space between the work surface and the
hob with a suitable temperature resistant silicone
(e.g. Novasil, Pactan) and smooth the joint with the
suitable wetting agent recommended by the
manufacturer. Follow the manufacturer’s
instructions.
Note:
Unsuitable silicone can permanently discolour
natural stone work surfaces.
Do not use the appliance until the silicone is
completely dry.
Removal of the hob
Disconnect the appliance from the electricity. Undo
all the clamping screws. Using a sharp knife cut the
silicone along the edge of the glass ceramic
plate. From below push the hob carefully up, until it
is free from the cut-out. You can now carefully
remove the hob upwards.
28 5080006423ind01 en 06.05 EB