Manual Gaggenau CK 482-100 (page 27 of 30) (English)

74259

Zoom out

Zoom in

1/30

Installation CK 481

The appliance is installed in a base cabinet with a

width of more than 900 mm.

• Produce the recess for the hob in your worktop.

Proceed as indicated on the installation sketch.

Note: the hob must not be stuck onto the worktop

with silicone.

• Insert the hob with the control panel front right

into the cut-out and align it.

• Secure the appliance on the worktop with the

clamping screws included. Fasten the clamping

screws as marked by the black arrows in the

picture. The dotted arrows show alternative fixing

points if required by the installation conditions.

Note:

During installation be careful that the front right

clamping screw is fitted to the worktop front side, as

fitting the clamping screw to the side can damage

the appliance base. Do not tighten the clamping

screws too tightly, as a uniform sealing gap should

be left all round.

• Connect the appliance to the electricity.

Check the appliance works correctly.

Removal of the hob

Disconnect the appliance from the electricity. Undo

all the clamping screws. Carefully push out the

appliance by the metal base from below.

Note:

Do not try to lever the hob out of the worktop cut out

using a tool.

min. 60

800

520

490

±2,5

780

±2,5

min. 30

min. 50

worktop

front

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau CK 482-100 in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau CK 482-100

Gaggenau CK 482-100 User Manual - German - 30 pages

Gaggenau CK 482-100 User Manual - Dutch - 30 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gaggenau CK 482-100 Manual

Product: