Manual Gaggenau CK 482-100 (page 17 of 30) (English)

74259

Zoom out

Zoom in

1/30

Timer operation

Changing or erasing a given time value

• Touch the timer symbol.

• You can now change the programmed time using

the UP-/DOWN-symbols. Touch the UP-/DOWN-

symbols simultaneously or touch the DOWN-

symbol, until 00 shows on the display. The spot on

the cooking zone display disappears. The timer

program is now switched off. The cooking zone

remains on the selected cooking level without

timer operation.

Programming the timer without cooking zone

switch-off

It is also possible to use the timer independently

from the cooking zones and without switch-off

function.

Any value between 1 and 90 minutes can be

entered on the timer.

• Touch the timer symbol. The timer display flashes

00. Select the required time using the

UP-/DOWN-symbols.

• The value is confirmed a few seconds later by an

audible signal and the timer starts. Alternatively

you can confirm the values by again touching the

timer symbol in the control panel.

• The timer display shows the elapsed time.

• After the elapse of the programmed time an

audible signal is sounded. The timer display

flashes. By touching any symbol on the display the

audible signal is switched off.

• The timer can be switched off at any time

by touching the timer symbol and then the

UP-/DOWN-symbols simultaneously.

Programming the timer without

cooking zone switch-off

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau CK 482-100 in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau CK 482-100

Gaggenau CK 482-100 User Manual - German - 30 pages

Gaggenau CK 482-100 User Manual - Dutch - 30 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gaggenau CK 482-100 Manual

Product: