Manual G-rail 6200 (page 12 of 28) (Dutch)

441948

Zoom out

Zoom in

1/28

STEP 1

Use the remote control (Open/Close buttons) to ensure a distance of 20

cm (8 inch) or more between the overlap carrier and the end pulleys.

STEP 2

Using the transmitter, keep the stop button pressed: a

green led will start flashing in the bottom of the motor unit,

release the button only when the LED flashes red. (after

approx.8 seconds). The system overlap carrier will move

briefly in both directions.

STEP 3

Press CLOSE* on the transmitter and release it when the curtain reaches

the desired position. Briefly pulse OPEN or CLOSE for further fine

adjustment.

* The button you choose here, either open or close, will represent the

close function.

STEP 4

Briefly press stop to confirm the position. The system will move briefly in

the “open” direction.

STEP 5

Press OPEN ** and keep it pressed until the curtain reaches the desired

position. Briefly pulse OPEN or CLOSE for further fine adjustment.

** Press CLOSE if reversed button function was chosen in step 3.

STEP 6

Briefly press stop to confirm the position. The system will move a short

distance in the “close” direction.

The red LED on the bottom of the motor unit goes out. The positions are

set and the rail is ready for use.

If a change in button function is desired, restart the procedure, choosing

the prefered button as in step 3 and 5.

í,QWKHHYHQWRIDSRZHUFXWWKHSRVLWLRQVLQWKHPRWRUXQLWZLOOEHPDLQWDLQHG

í,IWKHV\VWHPFXUWDLQLVPRYHGZLWKRXWSRZHUVXSSOLHGGXULQJDSRZHUFXWLW

will lose its reference positions and the system end positions will need to be re-

entered.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of G-rail 6200 in the language / languages: Dutch as an attachment in your email.

The manual is 1,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

G-rail 6200 Manual

Product: