441948

G-rail 6200 Manual

10
Zoom out
Zoom in
Previous page
1/28
Next page
2
In the event of poor transmission signal, the antenna,
which is concealed within the receiver housing, can be
extended outside of the housing as follows:
With the aid of a flat screw driver, open the housing at the
points indicated in fig 3.
The white wire is the antenna:
straighten it carefully and lead it
through the small cut-out in the
housing. (fig.4)
Do
not
cut the antenna!
Ensure the circuit board is correctly replaced in position between
the notches, then replace the lid by pressing firmly. (fig.5)
Setting RF-channels
Setting the RF channels is a timed procedure requiring each step has to be
executed within a certain time. Please read all steps carefully before staring this
procedure.
STEP 1 - Receiver unit
Press button (A) on the receiver and hold for 3 seconds.
Release the button when LED (B) lights.
STEP 2 - Transmitter unit
Within 10 seconds, press the STOP button of the desired channel until the
LED on the receiver goes out and flashes 3 times to confirm.
On a 6- or 80-channel transmitter, choose a channel first and then press
the stop button.
To add more channels repeat STEP 2 while the LED is still lit (within 10
seconds) by selecting the desired channel on the transmitter.
If no further signal is received from the transmitter, the receiver
automatically exits the channel programming mode after 10 seconds.
The receiver and transmitter should now be ready to use.
Following the procedure above, further channels can be added later – up to 85
channels in total.
3
!
5
AB
WM001G
4
!
FR
DE
NL
EN
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for G-rail 6200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of G-rail 6200 in the language / languages: Dutch as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info