781824
38
Zoom out
Zoom in
Previous page
1/87
Next page
Original User Manual Generator FX-SG Series
37
Maintenance measures
Engine oil change
Screw oil filler cap (yellow) with dipstick
out of oil filler neck.
Position suitable drain container under
the oil drain of the crankcase.
Unscrew drain plug (X) and drain
crankcase completely.
Screw the drain plug firmly back into
the crankcase.
Fill with engine oil of the specified
quality up to the upper mark on the
dipstick.
Screw the oil filler cap with dipstick
firmly back into the oil filler neck.
Check spark plug
Remove spark plug cap (Y)
Unscrew the spark plug
counterclockwise with the socket
wrench.
Remove soot deposits from spark plug
electrodes with a wire brush.
Check electrode gap (X) with gauge,
adjust to 0.7 to 0.8 mm if necessary.
Screw spark plug with gasket tightly
into engine housing.
Reassemble components in reverse
order.
NOTE!
A suitable spark plug wrench is included in
the scope of delivery.
Cleaning the oil filter cup
NOTE!
The oil filter cup prevents dirt or water
components from entering the carburettor.
Close fuel shut-off valve in "OFF"
position.
NOTE
Drain the engine oil when the engine is still
warm after shutdown. At
this way, quick and complete draining of
the engine oil is ensured.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fuxtec FX-SG7500B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-SG7500B in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 4.39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info