781824

Fuxtec FX-SG7500B Manual

37
Zoom out
Zoom in
Previous page
1/87
Next page
Original User Manual Generator FX-SG Series
36
compressors, circular saws, concrete
cutters, and other construction equipment.
If the generator is to supply two or more
loads, observe the following:
◼ Connect and switch on loads one
after the other.
◼ Switch on high-power consumers with
high current consumption or high
starting recent first, then the lower-
power consumers.
◼ Never connect loads to the 230 V and
400 V sockets at the same time.
In this case, the amplitude shift would
immediately blow a fuse.
Connection
WARNING!
Never connect the generator to the
mains supply on your own.
WARNING!
Qualified, authorized electricians may
only carry out a cable connection to
the house mains. Improper
connection can cause fires and
damage the generator!
Observe the following sequence:
◼ Start engine (generator) - manually via
cable pull with handle or electric
starter.
◼ Connect electrical consumers,
observe the starting sequence.
◼ Switch on AC fuse switch.
Switch off generator
Observe the following sequence:
◼ Switch off AC fuse switch.
◼ Switch the on/off switch of the
generator to the "0" (OFF) position.
◼ Turn the fuel tap to the "Shut off"
position.
Maintenance and care
WARNING!
Before carrying out any maintenance,
repair, cleaning, or inspection work,
ensure that the engine is switched off
and all components have cooled
down. Unintentional starting is
prevented by removing the spark plug
connector from the engine.
WARNING!
In the interest of your safety, only
perform the maintenance work
described here yourself.
In particular engine maintenance and
repairs, all other work must be carried out
by qualified, authorized personnel.
Improperly performed work can lead to
equipment damage and, as a
consequence, to severe injuries.
Maintenance intervals
Before each start
◼ Check engine oil level
◼ Check air filter, visual inspection for
dirt
After 20 h during initial operation
◼ Change engine oil
After 20 h or every 3
months (every 10 h if dust
is present)
◼ Clean air filter
After 20 h or every 6 months
◼ Change engine oil
◼ Clean oil filter cup
◼ Clean oil filter cup filter
◼ Clean spark plug
After 20 h or every year
◼ Check valve clearance, have adjusted
if necessary
In case of emergency, immediately turn on/off switch of power
directly to position "0" (OFF).
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fuxtec FX-SG7500B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-SG7500B in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 4.39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info