781823
22
Zoom out
Zoom in
Previous page
1/50
Next page
Originalbedienungsanleitung FX-SG1-3000 / FX-SG2-3000 de_en_fr_ita_rev2
22
Use current flow / create devices
If you have started the generator as mentioned above, you can use the power for some consumers. If
you want to operate several terminal devices, switch on the devices with the highest current
consumption or require a larger starting current.
IMPORTANT:
Inductive loads, such as electric motors, require a high starting current. That includes, for example,
fans, drills, pumps (4-way), log splitters (4-way), compressors, circular saws, concrete mixers and
other construction equipment.
If you want to use the DC power connector to charge an external battery, follow the battery
manufacturer's charging instructions. The 12 V battery may only be charged when removed. Proceed
as follows:
Press the DC Reset button (12 V- overload protection, see picture)
Check or observe the following:
If the DC Reset (12 V overload protection) is pressed.
The generator must not be in operation.
When connecting the battery, pay attention to the polarity of the charging
cable and the battery.
Cable: Red = plus (+)
Cable: Black = minus (-)
Insert the charging plug of the charging cable into the 12 V socket of the
generator.
Startup the generator - the battery is charged.
On/Off switch
(On/Off)
DC Reset button
(12V overload
protection)
Circuit breaker
Grounding screw
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fuxtec FX-SG2-3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-SG2-3000 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1.62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info