Manual Fuxtec FX-SG2-3000 (page 24 of 50) (English, German, French, Italian)

781823

Zoom out

Zoom in

1/50

Originalbedienungsanleitung FX-SG1-3000 / FX-SG2-3000 de_en_fr_ita_rev2

Storage

It would help if you permanently stored the generator in a clean, dry and frost-free place.

If the power generator is to be stored for an extended period, please proceed as follows:

• Shut off fuel cock and unscrew oil filter cup counterclockwise, drain and blow out

clean.

• Position suitable drain container under the drain, open fuel tap and drain fuel entirely

into the container.

• Replace a sealing ring (rubber) and screw the oil filter cup back in clockwise.

• Loosen carburettor drain plug and drain residual fuel from the carburettor into a

suitable container. Tighten the carburettor drain plug again.

• Unscrew the oil filler cap, unscrew the oil drain plug and completely drain oil from the

crankcase into a suitable container.

• Tighten the oil drain plug again and fill it up with suitable engine oil up to the upper

mark on the dipstick.

• Screw the oil filler cap back into the oil filler neck.

• Pull the starter rope in a controlled manner until resistance is felt.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-SG2-3000 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1.62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fuxtec FX-SG2-3000 Manual

Product: