Manual Fuxtec FX-PS152 (page 43 of 114) (English, German, French, Italian)

781731

Zoom out

Zoom in

1/114

Original Bedienungsanleitung FUXTEC FX-PS152 / FX-PS162_de_en_fr_ita_rev06

Installation of the lawn trimmer (thread spool)

Step one:

Insert the key (1) into the hole in the gearhead so that the gear shaft is locked. Unscrew

and remove the nut. Since it is a safety nut, please make sure that there is a left-hand

thread here.

Step 2:

mount the lower spacer (here point 2, the same washer as above when mounting the knife

2) and install the thread spool on the gear shaft. The remaining accessories, such as the

upper spacer washer/washer or the silver ring, are not required for mounting the thread

spool! Then tighten it by hand.

Warning!

Ensure that all components are correctly assembled and installed and that all screws are

tightened.

FUEL AND 2-STROKE OIL

Use unleaded gasoline with 2-stroke engine oil in a 40:1 ratio. During the first few

operations, a mixture ratio of 25:1 can be selected to initially lubricate all device parts

optimally.

WARNING: Never use pure gasoline in your engine. This will cause permanent engine

damage and voids the manufacturer's warranty for this product. Never use a fuel mixture

that has been stored for more than 90 days.

WARNING: This must be a premium oil for 2-stroke air-cooled engines. We recommend

the original FUXTEC 2T-oil "Made in Germany."

FUEL MIXTURE

Mix fuel with 2-stroke oil in a container provided for this purpose. Note the following

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-PS152 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 3.07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fuxtec FX-PS152 Manual

Product: