Manual Fuxtec FX-PS152 (page 45 of 114) (English, German, French, Italian)

781731

Zoom out

Zoom in

1/114

Original Bedienungsanleitung FUXTEC FX-PS152 / FX-PS162_de_en_fr_ita_rev06

29. Cold start of the engine

1. Place the device on a firm and flat surface.

Slide the engine stop switch forward to position 1.

2. Move the choke lever upwards to "COLD START."

3. Press the carburetor pump about 8-10 times (until gasoline flows in the line)

4. Pull out the starter rope with a short-stroke until resistance is felt

(about 100mm). A continuous, mainly fast train will provide a strong spark, and the engine

will respond after 2-3 trains.

5. Necessary: Set the choke lever to the "WARM START" position after the engine has

responded and immediately pull the starter again until the engine starts. '' see also video

device start on our homepage.''

6. Let the engine warm-up at idle for about 10 minutes

1 0

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-PS152 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 3.07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fuxtec FX-PS152 Manual

Product: