Manual Fuxtec FX-PS152 (page 42 of 114) (English, German, French, Italian)

781731

Zoom out

Zoom in

1/114

Original Bedienungsanleitung FUXTEC FX-PS152 / FX-PS162_de_en_fr_ita_rev06

Installing the protective shield

Install the protective shield on the driveshaft tube

against the gearbox housing. Tighten the holder of

the guard so that the blade guard does not move or

slide down during operation.

Mounting the metal blade

Steps:

1. Place the key (1) in the hole on the gearhead.

2. Remove the nut, the cover (4) and the

upper distance washer (3) from the gear shaft.

3. Place the metal sheet centrally on the lower

Distance washer (2). Make sure that the marked

side of the cutting blade is in contact with the disc (2).

4. Slide the upper spacer disc (3) over the

Gear shaft to the unmarked side of the metal sheet.

Make sure that the lower (unmarked) side of the cutting

blade is in contact with the upper spacer disc (3).

5. Put on the silver ring = cover (4) and screw the union nut tight

with the gear head locked

(see point 1).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-PS152 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 3.07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fuxtec FX-PS152 Manual

Product: