781774

Fuxtec FX-KSP250 Manual

39
Zoom out
Zoom in
Previous page
1/99
Next page
Original manual for petrol chainsaw FX-KSP series
39
Adjusting chain lubrication
WARNING!
Risk of injury!
Before adjusting the oil volume for chain lu-
brication, always switch off the engine!
The setting screw for the oil volume is on the
underside of the chainsaw.
A sign located there describes how to in-
crease or decrease the oil flow for saw chain
lubrication.
Chain oil setting screw
+
Increase oil volume
–
Decrease oil volume
◼ Regulate the oil volume underneath on the
clutch side using the screwdriver for oil
volume adjustment (D).
CAUTION!
As the tool is used, the fuel tank and also the
oil tank are emptied continually. Before re-
plenishing with fuel, therefore, replenish the
oil tank as well if necessary.
Chain brake
WARNING!
Risk of accident!
The chain brake function is of significant im-
portance for chainsaw safety. If the chain brake
does not function, a kickback during operation
could result in very serious or even fatal injury.
Therefore, have chain brake malfunctions recti-
fied without delay in a specialist workshop.
The chainsaw is equipped with an automatic
chain brake.
If a kickback occurs during sawing, the brake
is triggered automatically by the force of iner-
tia on the mechanism of the front hand guard,
which stops the saw chain.
Triggering the chain brake manually
◼ Push the front hand guard forwards during
operation
− The chain brake is engaged manually.
− The saw chain is blocked.
Automatic chain brake
In the event of a powerful kickback, the chain
brake function is triggered automatically and
without delay.
Checking chain brake function
◼ Switch off the engine.
◼ Trigger the chain brake manually by push-
ing the front hand guard (chain brake
lever) forwards.
◼ Press the tip of the guide rail with saw
chain against some wood and try to turn
the saw chain.
If the saw chain blocks, the chain brake is OK.
If the saw chain does not block sufficiently or
at all, immediately stop work with the chain-
saw and have the malfunction rectified with-
out delay in a specialist workshop.
… 39 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fuxtec FX-KSP250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-KSP250 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2.58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info