Working with the chainsaw
Prerequisites:
− The chainsaw is assembled correctly and
clean.
− All of the necessary settings on the chain-
saw have been carried out.
− The tank is filled with a sufficient volume
of fuel-oil mixture and chain saw oil.
Cold start
Before starting the engine:
When placing on the ground to attempt to
start the engine, ensure that the saw chain is
not in contact with the ground.
If there is ground contact while the engine is
being started there is an acute risk of accident!
Components of the chainsaw could be dam-
aged beyond repair.
◼ Block the chain brake using the front hand
guard. To do this, push the front hand guard
forwards until it is heard to engage.
◼ Turn the On/Off switch to the "I" position.
◼ Remove the saw chain cover.
◼ Pull out the choke as far as stop.
◼ Press primer pump several times until
there is enough fuel in it.
◼ Place the chainsaw on even ground and
secure. Step into the handle recess with
the right foot to do this.
◼ Secure the chainsaw with the left hand on
the front handle.
◼ Pull out the chainsaw's starter handle
on the cable until a resistance is felt.
Then continually pull out the starter
cable in doses 2 to 3 times until the
engine begins to start.
◼ Important: Actuate the throttle trigger
together with the throttle trigger lock
so that the choke is returned to the start
position.
