Manual Fuxtec FX-KS226 (page 53 of 146) (English, German, French, Italian)

781772

Zoom out

Zoom in

1/146

Original Bedienungsanleitung Baumpflegesäge FX-KS226_de_en_fr_ita_rev01

9. Operation of the chainsaw

The saw-chain starts to rotate as soon as the engine starts up, so make sure

there is sufficient safety clearance!

CHECKING THE OIL SUPPLY

After starting the engine, run the chain at

medium speed and check that the chain is

releasing oil, as shown in the figure.

(1) Chain oil

The amount of oil supplied can be regulated by

inserting a screwdriver into the opening at the

bottom of the coupling side. Adjust the oil supply

quantity according to working conditions.

(4) Chain oil flow adjustment screw

(5) Less oil

(6) More oil

NOTE

It is possible that the oil tank will also empty

during fuel consumption. Therefore, make sure

that the oil tank is filled every time the saw is

refuelled.

CARBURETTOR ADJUSTMENT

For the time being, adjust the L and H screw to

the factory setting by carefully closing them

completely to the right and screwing on the H

needle by ³/4 turn (± ³/8). Screw on the L

needle by 1.5 turn (± ³/8).

Start the saw and let it run at medium speed for

about half a minute (so it gets a little warm)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-KS226 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1.99 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fuxtec FX-KS226 Manual

Product: