Manual Fuxtec FX-KS226 (page 54 of 146) (English, German, French, Italian)

781772

Zoom out

Zoom in

1/146

Original Bedienungsanleitung Baumpflegesäge FX-KS226_de_en_fr_ita_rev01

CHAIN BRAKE

This device is equipped with an automatic brake.

If a kickback occurs during sawing, the brake is

automatically released by the inertia acting on

the weight inside the front guard and stops the

rotation of the saw chain. This brake can also be

operated manually by manually tilting the front

guard to the side of the guide bar. To release the

brake, raise the front guard on the side of the

handwheel as far as it will go. It is essential to

check the braking effect before commissioning.

(1) Front handle (2) Released (3) Braking

(4) Brake lever

Review procedures:

3. Switch off the engine

4. Hold the chainsaw horizontally with both

hands, take your hand away from the front

handwheel and knock the tip of the guide rod

against a tree stump to check the braking

effect. The actuation height varies according to

the size of the guide rod.

If the brake does not work properly, ask your

dealer to check and repair it. If the engine turns

at high speed when the brake is applied, the

clutch will heat up and this may cause a

malfunction. If the brake is released during

operation, immediately release the throttle and

stop the engine.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-KS226 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1.99 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fuxtec FX-KS226 Manual

Product: