Manual Fuxtec FX-KS226 (page 51 of 146) (English, German, French, Italian)

781772

Zoom out

Zoom in

1/146

Original Bedienungsanleitung Baumpflegesäge FX-KS226_de_en_fr_ita_rev01

• Replace damaged seal immediately!

• Tighten oil cover (5) with seal by hand

• Always wipe up any spilt saw-chain oil

8. Starting the chainsaw

• Take a secure standing position

• Place the appliance on the floor so that the saw-chain cannot come

into contact with anything

• Activate the chain brake (hand guard audibly engages to the front)

• Grip the handle firmly with one hand and press the device onto the

floor

Cold start

• Set ignition switch (3) to [1]

• Press the fuel pump (15) gently until no more bubbles are visible

(approx. 10×).

• Pull out the choke lever (14) completely

• Pull out the pull starter (6) evenly to the stop until the first ignition

noise is heard

• Push the choke lever (14) back in

• Pull out the pull starter (6) evenly to the stop until the engine starts

• Release chain brake (10)

• Operate the throttle lever (16) slightly

Warm start

• Set ignition switch (3) to [1]

• Pull out the pull starter (6) evenly to the stop until the engine starts

• Operate the throttle lever (16) slightly

• Release chain brake (10)

• If the engine does not start after pulling the pull starter three times,

repeat the entire starting procedure as described under Cold Start

After starting

• Run the engine at idle speed for some time

• Press the throttle slowly to increase the engine speed

When the engine speed is high enough, the clutch disengages and the saw-

chain starts to rotate.

• Ensure that the chain is sufficiently lubricated (► Check chain

lubrication)

• Check that the chain stops spinning when the throttle is released

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-KS226 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1.99 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fuxtec FX-KS226 Manual

Product: