781772

Fuxtec FX-KS226 Manual

49
Zoom out
Zoom in
Previous page
1/146
Next page
Original Bedienungsanleitung Baumpflegesäge FX-KS226_de_en_fr_ita_rev01
49
In some cases, contact between the tip of the chain bar and a solid object
can cause the chain bar to strike back at lightning speed, throwing it
backwards and upwards towards the operator. Pinching the saw-chain at the
upper part of the chain bar can cause the chain bar to bounce back and
towards the operator with a quick movement. If either of these events occurs,
you could lose control of the chainsaw, which could result in serious injury.
Do not rely solely on the chainsaw's built-in safety features. As a user of this
device, you must take some precautions to ensure that all work with the saw
can be performed without accident or injury
If you become reasonably familiar with the causes and characteristics of
kickback, you will reduce or eliminate the element of surprise, which
eliminates a common cause of accidents.
6. Mounting the blade and the saw-chain
ATTENTION: Always wear safety gloves when handling the saw-chain!
Mounting the saw bar and saw chain
• Release chain brake (10) (engage hand guard to the rear)
• Unscrew the fastening screws (12) and remove the sprocket protection
• Put the saw chain around the sprocket. Make sure that the
direction of the arrow on the chain is the same as that on
the sprocket.
• Put the saw-bar on and push it in the direction of the sprocket
• Insert the saw-chain into the guide groove of the saw-bar
• Put the saw-chain around the saw-bar
Ensure correct seating in the guide groove
• Put on sprocket cover
• Chain tension pin must engage in the hole of the saw-bar
• First slightly tighten the fixing screws (12)
• Tensioning the saw chain
• Slightly lift the tip of the saw-bar
• Check the saw-chain for proper running by turning it by hand
• Turn the tensioning screw (11) clockwise until the chain rests against
the underside of the saw-bar
• Tighten the fixing screw (12)
Run in the saw-chain. A new saw chain and bar must be re-tensioned after a
maximum of five cuts.
… 49 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fuxtec FX-KS226 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-KS226 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1.99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info