520093
16
Zoom out
Zoom in
Previous page
1/127
Next page
16
<Before Use>
Slide Lever
●LST
●LS
●LS
LST (Left), RST (right):
Outside levers
LS (Left), RS (right):
I
nside levers: Each lever has two ends, one in
front and the other on the back.
*It sounds when the lever comes to the center.
*You can check the lever position on the dial-monitor screen
in the linkage menu.
*Y
ou can select a slide lever and set the movement direction
on the setting screen of mixing functions.
Digital trim
This transmitter has six digital trims. Every
time you operate the digital trim, the trim position
will move by a constant step. If you continue
pushing, the movement will become faster. And
when the trim position comes to the center, the
sound changes so that you will know that the trim
is in the center. The trim position is always shown
graphically on the home screen.
●T6 ●T5
●T1
●T4
●T3 ●T2
*You can select one of the various operating modes for the
trim on the function screen of the linkage menu.
*You can also use the digital trims for other purposes like
levers by using Mixing Function.
Touch Panel/ Rotary Key/ Direct Key
●Direct Key
●Rotary Key
●LCD Display
(Touch Panel)
(S1-S4)
Touch panel, rotary keys and direct keys are used
for inputting data.
Touch Panel
Touch the panel with your finger or the attached
stylus pen, which is also used as a toolbox, to input
data.
*Plastic film is attached on the glass of the touch panel.
Please be careful so that you don't scratch the touch panel
with something hard, such as metal and sand sticking on
the surface. And don't push the touch panel too hard and
don't give any physical shock to the surface.Although you
may find some air bubbles under the plastic panel due to
environmental changes such as temperature, it is not a
defect.
Rotary key
In addition to touch panel, you can select items
by rotating the rotary keys to the left or to the right.
Dir
ect key
You can directly call your favorite functions or
menu screens.
(The default setting at the factory)
S1: System menu
S2: Linkage menu
S3: Model menu
S4: Return
[How to change assignment of the direct key]
1. Open the screen you want to call. Then push
S1 and S4 keys simultaneously. (You will see
the direct key setting screen.)
2. Select the direct key.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba T14-MZ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba T14-MZ in the language / languages: English as an attachment in your email.

The manual is 13,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Futaba T14-MZ

Futaba T14-MZ Quick start guide - German - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info