520093
14
Zoom out
Zoom in
Previous page
1/127
Next page
14
<Before Use>
•Antenna storage
When you store the transmitter in the carrying
box, detach the antenna and store it in the antenna
compartment in the transmitter.
Antenna Compartment
Cover
•Angle adjustment of the antenna
You can change the angle of the antenna, as
you like. Use 2.5mm hexagonal wrench to turn
counterclockwise to release the screw on the left
of the antenna holder, and change the angle of
the antenna, as you like. Finally tighten the screw
again.
●Screw
LED monitor
The color of the FUTABA logo mark shows the
status of the transmitter.
(LED Display)
When you turn on the transmitter, FUTABA
logo shows seven different colors first, and
then the color stays constantly pink. The
FUTABA logo blinks yellow very rapidly while
internal processing is carried out after the
power is turned on. But once the internal
processing is over, the logo turns to pink
color.
The FUTABA logo blinks very slowly while the
warning is displayed after the power is turned
on.
The FUTABA logo blinks very slowly while the
transmitter is sending out the frequency data
to set the frequency of the receiver. The logo
changes to pink as soon as the data sending
is completed.
The FUTABA logo turns on blue when you use
DSC cable and when the trainer function is
set at student's side.
The FUTABA logo blinks red slowly when you
attach the RF module that is different from
the setting.
Under the normal usage (, that is, radio wave
is being emitted), the FUTABA logo turns on
green.
Switch reallocation
You can reallocate the toggle switches on the
shoulders of the transmitter, as you like.
(Settings at exit factory)
• SA : 3 positions; Alternate; Short lever
• SB : 3 positions; Alternate; Long lever
• SC : 3 positions; Alternate; Long lever
• SD : 3 positions; Alternate; Short lever
• SE : 3 positions; Alternate; Short lever
• SF : 2 positions; Alternate; Long lever
• SG : 2 positions; Alternate; Short lever
• SH : 2 positions; Momentary; Long lever
*You can choose switch and set the ON-direction in the
setting screen of the mixing functions.
•When you change switches:
●Screw
[How to change switches]
1.Using the attached 2. 5mm hexagonal
w r e n c h , t u r n c o u n t e r c l o c k w i s e t h e
hexagonal screw on the switch block and
remove the switch block from the transmitter.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba T14-MZ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba T14-MZ in the language / languages: English as an attachment in your email.

The manual is 13,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Futaba T14-MZ

Futaba T14-MZ Quick start guide - German - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info