520093
17
Zoom out
Zoom in
Previous page
1/127
Next page
17
<Before Use>
Stick Adjustment
Adjustment of the stick lever angle
You can adjust the inclination of the sticks
toward outside.
●Screw
Use the attached 1.5mm hexagonal wrench to
turn the hexagonal screw on the stick housing.
Turn the screw clockwise to adjust the stick toward
outside or counterclockwise toward inward.
*Be sure that you don't turn the screw counterclockwise too
much. Otherwise, the screw will fall apart.
Adjustment of the lever length
You can adjust the length of the stick lever head.
[How to adjust the length]
1. Turn the lever head "A" counterclockwise
while holding the lever head "B". Then the
lock will be released.
2
. Move the lever head "B" to the position you
want to set. Then hold the lever head "B" and
turn the lever head "A" clockwise until it is
locked.
Adjustment of the tension of the stick lever /
Adjustment of the retaining force of the throttle
stick
You can adjust the tension of the self-return stick
lever and the retaining force of the throttle stick
from outside. And you can switch the touch either
for airplane or for helicopter. (Change of the ratchet
feature)
●Stick Tension(J4)
(Mode 1/2)
●Stick Tension(J3)
(Mode 1)
●Retaining
Force (J3)
(Mode 2)
●Retaining Force (J2)
(Mode 1)
●Stick
Tension
(J1)
(Mode 1/2)
●Stick Tension(J2)
(Mode 2)
[Adjustment of tension]
1 . Re m o ve t he r ub b e r g r ip b ehi n d t h e
transmitter.
2.
Use the attached 1.5mm hexagonal wrench
to turn the adjustment screw through the
hole for each stick and adjust the strength of
the spring, as you like.
* Turn the screw clockwise if you want the spring stronger.
3. After adjustment, attach the rubber grip to
the original position.
[Adjustment of the retaining force]
1. Open the dust-protection cap covering the
hole for the throttle stick adjustment behind
the transmitter.
2.
Use the attached 1.5mm hexagonal wrench
through the hole and turn the screw to adjust
the retaining force, as you like. If you want
the spring stronger, turn the screw clockwise
• For airplanes: Adjust the screw on the left.
• For helicopters: Adjust the screw on the right.
*This transmitter has two ratchet plates, one for airplane and
the other one for helicopter. If you tighten both screws, you
won't able to achieve the adjustment that you need because
of the overlap of those two adjustments.
*If
you want to change the setting from airplane to helicopter
(or from helicopter to airplane), turn counterclockwise the
screw for the airplane until the throttle stick moves freely.
Then turn the screw for the helicopter until you get the
retaining force you like.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba T14-MZ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba T14-MZ in the language / languages: English as an attachment in your email.

The manual is 13,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Futaba T14-MZ

Futaba T14-MZ Quick start guide - German - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info