747922
166
Zoom out
Zoom in
Previous page
1/183
Next page
166
Model Menu (Helicopter Functions)
Gyro [Helicopter]
Use this when you want
to adjust sensitivity via
VR, etc., and not on-
screen data entry. Tap "--
", select "VR", etc., and
then tap the value to
adjust. (Won't operate
when value is "0".)
The operation mode
(AVCS/NOR) and
sensitivity of the 3
axes Gyro/Gyro2/
Gyro3 can be set.
Tapping these will
pull up the detailed
selection screen for
each.
Rate1 Gyro type and
gain
Rate2 Gyro type and
gain
Rate3 Gyro type and
gain
The ON/OFF switch
of gyro is chosen.
When using Rate2/Rate3, make it
INH ON or OFF.
Gyro(RUD)
setting
Gyro2(AIL)
setting
Gyro3(ELE)
setting
3 rate (gyro gain)
adjustment
Condition group/
single mode selection
(Gr. /Sngl)
This function is used to adjust gyro sensitivity.
The sensitivity and operation mode (Normal mode/
AVCS mode) can be set for each condition.
The gyro sensitivity can be switched with each
condition or the switch. (3 sensitivities)
*Compatible with 3 axis gyro (CGY750).
Setting method
ŏ When using this function, Tap [INH]. (ON is
displayed.)
ŏ When you want to set the same contents at
other conditions, select the group mode.
When you want to set the selected condition
only, select the single mode (initial setting).
ŏ Three rates can be switched for each
condition. (Rate1/Rate2/Rate3)
ŏ A Àne tuning VR can be set.
ŏ Select [Gyro] at the
model menu and call
the setup screen.
Note: [Gyro] [Gyro2] [Gyro3] Default function
[Gyro]: CH6(FASSTest12CH) CH5(Other system type)
[Gyro2] : CH9
[Gyro3] : CH10
Always set to [--] both (control) and (trim) for
the [Gyro] function at the Function menu in
the Linkage menu.
ŏReturn to Model menu
166


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba FX36 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba FX36 in the language / languages: English as an attachment in your email.

The manual is 11,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Futaba FX36

Futaba FX36 User Manual - German - 61 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info