747922
43
Zoom out
Zoom in
Previous page
1/183
Next page
43
Basic Operation
ŵƄƑƊƈŃŷƈƖƗƌƑƊŃżƒƘƕŃŵŒŦŃŶƜƖƗƈƐŃ
It is extremely important to range check your models prior to each Àying session. This enables you to ensure
that everything is functioning as it should and to obtain maximum enjoyment from your time Àying. The FX-36
transmitter incorporates a system that reduces its power output and allows you to perform such a range check.
ŵƄƑƊƈŃƆƋƈƆƎŃƐƒƇƈŃ
During this mode, the RF power output is reduced
so the range test can be performed. In addition, when
this mode is activated the right LED on the front of the
transmitter starts blinking and the transmitter gives users
a warning with a beeping sound.
The "Range check mode" continues for 90 seconds
and after that the power will return to the normal level.
To exit the "Range check mode" before the 90 seconds,
press the "H/E" button. NEVER start flying when the
"Range check mode" is active.
Should you require additional time to perform a range
check, highlight Restart before your time expires and tap
the screen one time.
ŵƄƑƊƈŃƆƋƈƆƎŃƓƕƒƆƈƇƘƕƈ
1. With the "Range check mode" on, walk
away from the model while simultaneously
operating the controls. Have an assistant
stand by the model to confirm that all
controls are completely and correctly
operational. You should be able to walk
approximately 30-50 paces from the model
without losing control.
2. If everything operates correctly, return to
the model. Set the transmitter in a safe, yet
accessible, location so it will be within reach
after starting the engine or motor. Be certain
the throttle stick is in the low throttle position,
then start the engine or motor. Perform
another range check with your assistant
holding the aircraft with the engine running
at various speeds. If the servos jitter or move
inadvertently, there may be a problem. We
would strongly suggest you do not Áy until the
source of the difÀculty has been determined.
Look for loose servo connections or binding
pushrods. Also, be certain that the battery
has been fully charged.
About 100 feet
Range check mode
Range checking on
low power.
WARNING
Do not fly in the range check mode.
*Since the range of the radio waves is short, if the
model is too far from the transmitter, control will
be lost and the model will crash.
2. THR Stick Slow.
1. While pushing "U/M" button.
4. Select "Range check" at the System menu.
5. "Start" tap.
6. The H/E button is pressed to end a range
check.
3. FX-36 Power ON.
U/M
Press and
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba FX36 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba FX36 in the language / languages: English as an attachment in your email.

The manual is 11,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Futaba FX36

Futaba FX36 User Manual - German - 61 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info