30098

Futaba FP8SSHP Manual

7
Zoom out
Zoom in
Previous page
1/36
Next page
(19) Idle up 1 switch ( 1 switch)
Right ON, Left OFF.
(20) Idle up 1 ratcheted knob (1 knob)
•When the 1 switch [19] is set to ON, the throttle
servo "stop position" (idle up amount) can be
adjusted with this knob.
• If fail safe switch [13] on the trimmer panel at the
back of the transmitter is set to the INH posi-
tion, the idle up 1 function is inoperative. Light
goes out to indicate that. When switch [13] is set
to the IDLE1 position, monitor lamp [B] comes
on to indicate that the idle up 1 function is
operative. If the switch [19] is then set to ON,
lamp [B] flashes to indicate that the idle up I
function is operating.
Throttle servo
Throttle servo
Idle up 2 point Adjustable
with trimmer [11] on the
trimmer panel at the back of
transmitter.
Fig.
11
•The
pitch
control
servo
low side
can
also
be
adjusted with trimmer [6] (when idle up switch
5
2 is ON). This is convenient in rolls and other
aerobatics.
Idle up I point Adjustable with
trimmer
9
on the trimmer
panel at the back
of the
transmitter.
Fig.
10
(21) Idle up 2 switch ( 2 switch)
Right ON, Left OFF.
•When the 2 switch [21] is set to ON, the throttle
servo idle up point can be adjusted with trimmer
[10]
on the trimmer panel at the back of the trans-
mitter. The idle up 2 point can also be adjusted
with trimmer [11].
•When fail safe switch
[14]
on the trimmer panel at
the back of the transmitter is set to the INH posi-
tion, the idle up 2 function is inoperative. When
the switch is set to the IDLE2 position, monitor
lamp [C] comes on to indicate that the idle up
2 function is operative. If the 2 switch
[21]
is
then set to ON, lamp [C] goes out to indicate that
the idle up 2 function is operating.
Pitch
control
servo
When the idle up 2 switch
is ON, the pitch control
servo can be varied 50%
at
the pitch low side with
trimmer 6 on the trimmer
panel in the back of the
transmitter.
Pig.
12
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba FP8SSHP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba FP8SSHP in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info