30094
11
Zoom out
Zoom in
Previous page
1/44
Next page
40 Trainer switch
Pull on/self-off switch. The transmitter connected by the trainer cord (M-TC) operates and when
it is OFF, your-own transmitter only operates.
• Trainer
Connect the transmitters with the trainer cord
(M-TC-FM, purchased separately) as shown in
Fig.5. When the switch is in the ON (pull) posi-
tion,
the
student's
transmitter
operates
and
when the switch is in the OFF position, the
instructor's transmitter operates. The transmit-
ter at which the trainer switch is operated on-
off becomes the instructor's.
Fig.
5
Student transmitter
Instructor transmitter
(Power switch ON and transmitter operating)
(Power switch always OFF)
• Rotative open gimbal stick
Rotative open gimbal stick allows setting of the
operating direction of the stick within a range of
±34 degrees by losening screws I to 4 in the
figure 1/2 turn and turning the stick grille.
• Set the stick in the direction in which operation
is easiest.
Fig.
6
After setting, retighten the screws.
• The new gimbal is open. This one has been used
only for the most expensive radio controls. It
also has the built-in tension adjustment mech-
anism on open gimbal for the first time. You can
adjust tension of spring for your best stick
feeling.
Remove the rear panel and right side panel and
adjust the spring tension.
Right side panel mounting screw
Remove these
screws, and
remove the longer
back cover.
Fig.
8
Common screw
Fig. 7
Rear panel Mounting screw
Common
screw
Turn with a Phillips screwdriver.
The spring tension can be adjusted as desired
by removing the transmitter longer back cover
and turning the adjusting screw of each stick.
Adjust the spring tension for the best stick feel.
9
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba FP8SSAP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba FP8SSAP in the language / languages: English as an attachment in your email.

The manual is 2,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info