30030
9
Zoom out
Zoom in
Previous page
1/16
Next page
Neutral
Throttle servo
Fig.
12
Adjustable with
rudder ATV right
knob (right full
Aileron)
Adjustable with the
rudder ATV left
knob (left full
Aileron)
Right
Left
Aileron servo Fig. 11
3 Aileron dual-rate trimmer adjusts the
aileron travel when the 12 aileron dual-rate or
VTR switch ON. Travel adjustment ranges 40
to
100%.
4 DR (dual-rate) <-> VTR (Variable Trace
Ratio) switch
5 6 Aileron-rudder MIX trimmer (From
aileron to rudder) Adjust the mixing volume
and the mixingdirection of rudder. After linkage
is completed adjust the MIX direction and
amount with trimmers. MIX amount adjust-
ment ranges 0—100% each, the same adjust-
ment can be done even if the servo is reversed.
7 Aileron -> rudder mixing ON-OFF
switch
8 9 Elevator ATV trimmer 9 UP is for up
and 8 DOWN is for down. The adjustment
range is same as the aileron ATV.
10
Elevator dual-rate trimmer adjusts the
elevator travel when the 13 elevator dual-rate
or VTR on/off switch is
ON.
11 DR <-> VTR switch
12 Throttle hold point trimmer This trim-
mer
sets
the throttle
servo
stop
point
when the
throttle hold switch 18 is set to ON. When the
trimmer is turned counterclockwise, the throt-
tle servo moves to the stow side.
13
Throttle high side ATL trimmer This
trimmer adjusts only the high side of the throt-
tle stick. It is extremely convenient when con-
necting the linkage, since the low side remains
unchanged even when the throttle high side is
adjusted with this trimmer.
14 Throttle -> Rudder mixing ON-OFF
Switch This switch turns mixing from the
throttle control (channel 3) to the rudder
(channel 4) ON and OFF.
15 16 Rudder ATV trimmer. The adjust-
ment range is same as the aileron ATV.
17
Rudder
dual-rate
trimmer
Rudder dual-
rate or VTR trimmer adjusts the rudder travel
when the 19 rudder dual-rate or VTR on/off
switch is ON.
18 DR <-> VTR switch
19,20
Pitch
control
trimmer
The
servo
throw
can be varied from 0 to 100% of the total. Set
for
optimum pitch during normal flight.
Pitch control servo
High pitch can be
adjusted within
this range.
Low pitch can be
adjusted within
this range.
20 Pitch control
high side
trimmer
19 Pitch control
low side
trimmer
21Throttle -> Pitch control mixing ON-
OFF switch This switch turns mixing from
the throttle control (channel 3) to the pitch
control (channel 6) ON and OFF.
Fig. 13
7
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba FP7FGH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba FP7FGH in the language / languages: English as an attachment in your email.

The manual is 2,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info