30030
8
Zoom out
Zoom in
Previous page
1/16
Next page
13 Elevator dual rate switch Elevator dual
rate ON-OFF switch. Simitar to aileron dual
rate, (dual rate ON) the elevator deflection can
be adjusted with the elevator dual rate trimmer
10 and the servo operating linearity can be
switched with the DR <-> VTR switch 11.
14
Trainer switch Pull on/self-off switch. The
transmitter connected by the trainer cord (M-
TC) operates and when it is OFF, your-own
transmitter only operates.
15
Throttle-rudder
mixing
knob
Ratchet
knob that sets the throttle to rudder mixing
amount and direction. Mixing amount is 0 —
50%.
16
Idle-up ON-OFF switch This switch is
turned ON when pushed forward.
Throttle servo
Low
High
l7 and the servo operating linearity can be
switched with the DR <-> VTR switch 18 .
Other functions are the same as those of the
aileron dual rate switch.
20 Power switch
21
Square level meter Level meter indicates
the transmitter output power and indirectly
shows power supply voltage.
22
Antenna
23
Antenna storage The opening is used for
storage of the antenna while carrying the trans-
mitter. It is located at the bottom right side of
the transmitter.
24 Handle/stand
25 Hook for neck strap
26 Transmitter Ni-Cad battery charging
jack
27 Trainer cord socket
28 Transmitter RF module
29 Trimmer panel
Non-slip adjustable lever head
The length of the lever head is adjusted to
suit the operator.
Unlock lever head (A) and (B), by turning
them in the arrow direction, set head (A)
to the desired length, then relock the
heads.
6
Idle up amount is adjustable within this
range with the knob 17
Fig.
9
Lever head (A)
Lever head B
17
Idle-up
trim
control
Sets
the
idling
speed
when the 16 idle-up switch is ON.
18
Throttle hold switch When this switch is
set to ON, the throttle servo stops at the posi-
tion set at the 12 trimmer and only the pitch
servo operates. This switch is used in auto-rota-
tion
dives.
Both throttle
and
pitch
servos
mix-
ing is performed when this switch if OFF. It is
ON when pushed forward.
19
Rudder dual rate switch Rudder dual
rate ON-OFF switch. Similar to aileron dual
rate, at dual rate ON, the rudder deflection can
be adjusted with the rudder dual rate trimmer
Fig.
10
Inside rear trimmer panel
1,2 Aileron ATV
(Adjustable Travel
volume) trimmer [2] RIGHT is for the right
aileron and 1 LEFT is for the left aileron.
The servo travel volume is independently ad-
justable to the left and right from the neutral
position. Travel adjustment ranges 0 to 100%.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba FP7FGH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba FP7FGH in the language / languages: English as an attachment in your email.

The manual is 2,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info