29053
46
Zoom out
Zoom in
Previous page
1/78
Next page
Sailplane Section
EXAMPLE SAILPLANE SETUP INSTRUCTIONS
The following example shows how the PCM
1024Z
may be programmed
for
a
sailplanes
with
two, four, or five wing servos. The settings present-
ed here are for typical models of the three types.
Your model's settings are likely to vary somewhat
from
these,
but
the procedures
given
will
still be
applicable. To make things easier, be sure that the
horns and linkages are all at the same angles and of
the
same
length.
This
will
make
it
so
identical
servo motion produces identical control surface
movement on both sides.
This manual refers to ailerons, speed flaps, and
brake flaps. Here are the definitions of each:
Ailerons are control surfaces located nearest the
tips of the sailplane's wings. Speed flaps are con-
trols that can move together (as flaps) or differen-
tially (as ailerons), and are commonly found on
most high-performance models. Brake flaps move
together only, and are used for landing. Brake
flaps are sometimes found on scale models. Addi-
tionally,
any
sailplane
can
have
airbrakes
or
spoilers, and electrics will of course have a motor
control.
1
2
3
Use the Model Select
function MSL to select
a vacant model memory,
and choose desired
sailplane type using the
Type TYP function
from Model menu.
Be sure to select a vacant memory. Choose the default flight condition (we recommend NORML).
desired sailplane type. RENAME model now using Later you may add Launch, Speed, Distance, Landing,
the Model Name MNA function in the model menu. etc. (Step 16).
Switch to the Condition menu CND and name the
Set Control Order using
the Function Control
FNC in the model
menu. Here you may
choose what sticks and
sliders control the
different functions.
Two Wing Servos
[2-S]
Flaperons, Delta Wing,
Electrics.
Optional airbrakes or
spoilers
Set Flaperon FPN
(recommended). Aileron
differential ADF
doesn't allow Flaperon
mixing. You can get
differential in FPN by
setting endpoints.
Four Wing Servos
[4-S]
F3B, multitask, scale.
Optional airbrakes or
spoilers
To get Butterfly control on the throttle stick, change
the SF2 control to J3.
If you will want full-span camber changing, assign
SF1 to LS (for left slider control) or whatever device
you want (LS is the default). Be sure to cut its
authority down in all flight modes using AFR; around
10% is plenty for most models. Check direction of
travel.
Five Wing Servos
[5-S]
Multitask or Scale with
Optional Airbrakes and/or
spoilers
Sailplane Section, Page 122
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 9ZHP_part2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 9ZHP_part2 in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info