29053

Futaba 9ZHP_part2 Manual

28
Zoom out
Zoom in
Previous page
1/78
Next page
Helicopter Section
PITCH CURVE
(PCV)
This function may be used to set different pitch
response curves for each flight condition (normal,
idle-up 1, idle-up 2, throttle hold, etc.). This func-
tion
is
activated
when
the
respective
flight
condi-
tion
is
selected.
A 13-point curve can be input, and Point 7 can
be defined as the pitch curve reference point. You
may
also
define
High
and
low
side
rate
trim
volumes
(the
high-side
pitch
trim
volume
control
is
defined as the right side lever at initial setting).
Pitch curve activation should be done with the
model menu pitch curve (PIT) function (page 58).
Setting Up Pitch Mixing
Pitch Curve Inputting
In the Condition Menu, press the PCV key to get the
PIT CURVE menu shown below.
Curve setting-
Rate
setting
High side-
Low side-
Point Movement
Buttons
Trim volume setting
Return to
Condition Menu
Setting Point Selection (Points 1 to 13)
Press the B key to turn on the curve inputting
function. Use the movement keys
Q
and R to select the
point whose value is to be set. The
PT->
key increases
the point number by one, and the <-PT key reduces the
point number by one. The active point on the curve Is
shown as a black dot.
Curve Point Rate Setting
Once you have selected the desired point on the curve,
you may input the rate with the rate setting keys
E
to
M The number keys 0 through
100
input the value
directly. The + and - keys increase or decrease the
value by 0.5 with each button pressing (so it takes two
hits to see a number change because of numeric round-
ing).
You may set or reset each point on the curve by
repeating these steps for each point.
High-Side Rate Adjustment
Press the C key to adjust the High-Side rates. The
numeric keys E to M are used to directly set the rate,
which may vary from 0 to 110%. The default value is
100%.
Low-Side Rate Adjustment
You may set the Low-Side rates by pressing the D
key. As before, the rate may be set with the numeric keys
E to M. This rate may vary from 0 to 110%, and its
default value is 100%.
Trim Volume Setting
If you'd like to be able to change the pitch curve while
in flight, you can set up this feature in the volume setting
screen. Press the O key to get into this screen, and
choose the control you'd like to use for this feature. For
a description of the volume setting method, see page 37).
The right slider is set as the high side trim volume when
Pitch Curve is activated.
Note: when Point 7 of the pitch curve is changed
after setting the HIGH/LOW side rates, the other points
change also. This is because Point 7 is used as the rate
setting reference point.
Helicopter Section, Page 104
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 9ZHP_part2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 9ZHP_part2 in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info