Manual Futaba 9ZHP_part1 (page 63 of 78) (English)

29011

Zoom out

Zoom in

1/78

Common Condition Section

Programming Servo Delay at Condition Switching

This function is used to set the servo delay for each

channel, from channel 1 to channel 8. Whenever a flight

condition is switched, the system uses the programmed

delay to slow down sudden servo position changes. This

might be used, for example, to prevent a sudden loss of

lift on a sailplane when switching from flaps down for

launch to a regular position for normal flight.

Inputting Channel Delays

The setting screen for this function is called from the

ATV setting screen. If you are not already in the ATV

menu, select it from the condition menu. Next, press the

NXT R

key at the ATV setting screen. This action

displays the channel delay setting screen shown below.

Return to

ATV screen

Return to

condition menu

Channel selection keys

Select the desired channel with the

F to M

keys.

When selected,

input

the

delay

with

the

numeric

keys

to M. The delay may be set independently for each chan-

nel between 0 and 100%. Each 20% delay works out to be

approximately one second, but experiment to be sure

that you get what you want.

Select the next channel with the

SEL O

key and

repeat these steps to input its delay.

When you are finished, you may return to the ATV

menu by pressing the

PRE R

key, or you may return

to the Model menu by pressing the

N (END)

key.

After

operation

Before

operation

Common Conditions Section, Page 61

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 9ZHP_part1 in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Futaba 9ZHP_part1 Manual

Product: