29011
62
Zoom out
Zoom in
Previous page
1/78
Next page
Common Condition Section
ADJUSTABLE TRAVEL VOLUME (ATV)
The ATV function adjusts the servo left and
right throws, and to generate differential throws
and correct for linkages. The travel rate can be
varied from 1% to 140% in each direction on chan-
nels 1 to 8. Setting so that the servo travel exceeds
the set value even when the travel is increased by
mixing, etc., is also possible by setting the mixing
mode. NOTE: Stick movement is indicated by the
" " "symbol on the screen.
Included in this function is the servo delay
setting menu. This function is used to smoothly
transition between different servo neutral posi-
tions when the flight condition is changed.
Inputting Travel Volumes
Activation of command
In the Condition Menu, press the
ATV
key to get the
ATV menu shown below.
Mode setting
To next screen
Channel setting
Rate setting
(Side A)
Rate setting
(SideB)
Return to condition menu
Mode selection keys
Channel selection
To enter the channel selection menu, press the B key,
and then press the key of the channel to be set. Depend-
ing on the Model setup, the following keys will appear on
the bottom of the screen:
Airplane:
AIL ELE THR RUD GEA FLP AU1 AU2
Helicopter:
AIL THR RUD GYR PIT AU1 AU2
Sailplane:
AIL ELE ABR RUD SF1 SF2 AU1 AU2
ATV
Mode selection
To select the ATV mode, press the
normal mode by pressing the NOR
key. Select the
key.
Input Rates
You can select the amount of travel in both directions,
which are designated as "A" and "B". To enter the rate
for Side A, press the C key and use the rate setting keys
F to M to input your desired rate. The rate is initially
set
to
100%.
Press the numeric key nearest the rate you desire from
among the
H (0) to M (100)
keys. You can then
increase and decrease the selected value with the G ( - )
and F ( + ) keys. Each key press adds or subtracts 1.
Set the movement up so that no binding occurs at any
extreme motions of sticks, knobs, or sliders. You may set
the travel to anywhere between 10 and 140%.
Now you will set up Side B's rate similarly. Press the
D
key and set the rate with the rate setting keys F to
M
As before, use the numeric keys to get the travel you
desire.
Repeat this procedure for all the channels in sequence.
When you
are
finished, end by
pressing
the END N
key, or use the
NXT
R key to get to servo delay
programming.
Common Conditions Section, Page 60
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 9ZHP_part1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 9ZHP_part1 in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info