Manual Futaba 9ZAP_part1 (page 51 of 78) (English)

29047

Zoom out

Zoom in

1/78

Model Setting Section

TYP—MODEL TYPE SELECTION

This function is used to select the type of

model from airplane, helicopter, and sailplane.

Sailplanes may be set up with either two wing

servos (2-S), four wing servos (4-S), or five wing

servos (5-S).

The model type function automatically selects

the appropriate mixing functions for the chosen

model type, so you must refer to the particular

model section of this manual to determine the

appropriate servo connections.

When the Model Type Selection command is

invoked, all the data in the active memory is

cleared. Be sure that you don't mind losing this

data, or back it up to another memory using the

copying functions.

Model Type Selection Usage

In the Model Menu, press the TYP key to get the

Model Type Selection menu.

Airplane

Helicopter

Sailplane

Type Selection Keys Return to Model Menu

Select the appropriate model type by pressing the key

underneath the view of the model: F for Helicopter. I

for Airplane, or L for sailplane. If the selection is correct,

press the YES ( R ) key, otherwise reselect the type

after pressing the NO ( Q) key-If you have selected the Sailplane model type, you

now must select the wing type from the submenu that

appears. Use the 2, 4, or 5 ( K, L, or M) keys to

select the wing type. If the selection is correct, press the

YES (R)

key, otherwise reselect the type after pres-

sing the NO (Q) key.

When complete, exit by pressing the

END (N)

key.

Model Setting Section, Page 49

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 9ZAP_part1 in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Futaba 9ZAP_part1 Manual

Product: