29043
19
Zoom out
Zoom in
Previous page
1/60
Next page
ADJUSTABLE FUNCTION RATE
AFR is a servo endpoint limiting function, similar to ATV with three exception:
1. AFR limits only the Dual Rate OFF (High
Rate) servo travel. Trim throw and Dual Rate
ON (Low Rate) limits are unaffected (unless
AFR is reduced below the D/R ON limit).
2. AFR can be used with mixing functions to
adjust more than one channel simultaneously.
For example, let's assume that the Aileron
Differential mixing program is activated, and
that CH1 controls the right aileron and CH7
controls the left aileron. AFR can be used to
adjust the aileron control response because
the CH1 and CH7 servos will be affected
simultaneously (Ex: Reducing the left aileron
AFR will reduce the left hand servo (CH7) UP
throw and the right hand servo (CH1) DOWN
throw simultaneously.).
With ATV, the CH1 servo and CH7 servo
throws in the above example would have to be
adjusted separately.
3. AFR sub trimmers are available on the front
trimmer panel for Aileron and Elevator AFR.
These allow quicker field adjustments in con-
trol response without the necessity of going
through the usual programming steps. Adjust-
ments can even be made during flight (by an
assistant). Maximum adjustment available on
the sub trimmers is ±25% of the amount of
travel set on the AFR program screen.
Setting Method
1) The setting method
for AFR is the same as for
ATV (See page 16).
2) Select the EDIT screen and press the AFR pro-
gram key.
3) The percentage figures displayed on the
extreme left and right sides of the screen
(CH1 and CH2 only) show the total amount
of travel actually set (The amount set with the
program
keys
+
or
the
amount
set
with
the
AFR sub trimmers.)
4) When the sub trimmers are turned slowly, a
tone will sound at the exact neutral position.
With the sub trimmer in neutral, the total
travel will equal that set with the program
keys.
In the bar graph illustration below, the right
hand throw is reduced to 70% of normal throw
by AFR. Note that the Dual Rate ON (Low
Rate)
limit
and
Trim
throw
limits
remain
the
same on both sides (Compare with the ATV
illustration on page 16).
NOTE: Trim Limits and D/R Limits same in both directions.
[17]
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 9VAP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 9VAP in the language / languages: English as an attachment in your email.

The manual is 3,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info