Manual Futaba 9VAP (page 17 of 60) (English)

29043

Zoom out

Zoom in

1/60

Fail Safe and Hold General Instructions

Fail Safe

• F/S or HOLD can be selected for each channel

8).

• Channels selected for HOLD will remain in

HOLD

until

normal

signal

resumes. Those

selected for F/S will move to their pre-set posi-

tions after 1 second of signal interruption.

• F/S SET simultaneously stores the desired Fail

Safe position in the transmitter memory and

sends it to the receiver.

•The

F/S

data

automatically

sent

the

receiver when the transmitter is first turned ON

and at one minute intervals as long as the trans-

mitter is left on.

• The F/S position can be checked with the

CHK program key.

• Only the Throttle

channel (CH3) can be set for

Battery Fail Safe.

Fail Safe Setting

1) Display the EDIT screen, then select the

FAILSAFE screen by pressing the F/S pro-

gram key.

2) Move

the

cursor

to the desired channel with

the

and

cursor keys and select

HOLD or F/S for each channel by pressing the

or program key. When Failsafe is

selected, the number 50 will appear below the

appropriate channel on the POSI-(%) line of

the FAILSAFE screen.

3) Store the Failsafe positions in the transmitter

Battery Fail Safe Setting

1) Set the Failsafe position on the throttle chan-

nel (CH3) as described above. A position

slightly above the minimum engine idle speed

is recommended.

2) BFS

Release Point Setting (When

THR is

designated as the release channel)

• Move the cursor to the B/FS-RESET line

the FAILSAFE screen with the

cursor key.

•

Select the BFS

release

channel

with

the

or program key.

• Set the throttle stick to the desired

BFS

release

point

and

press

the program

key. This designates CH3 (Throttle) as the

release channel and sets the stick release

point

simultaneously.

3) To release BFS by the CH9 switch, press the

program key.

•

BFS

can

released

by the CH9 switch

only

when the switch is moved to the upper

position. If the CH9 switch is in the lower

position, BFS cannot be released.

• In the BFS release state, the characters 0%-

RESET are displayed on the B/FS-RESET

line of the FAILSAFE screen.

4) If Battery Fail Safe is not desired, press the

program key (when the cursor is on the

B/FS-RESET line). The BFS

function

will

then be disabled.

memory by pressing the

key while hold-

ing the stick or lever of the channel being set

in the desired Failsafe position. Simultaneous-

ly, the data is also transmitted to the receiver

and is automatically re-transmitted at one

minute intervals.

In the example below, (Throttle) was set to Fail Safe and Battery Fail Safe.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 9VAP in the language / languages: English as an attachment in your email.

The manual is 3,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Futaba 9VAP Manual

Product: