29043
20
Zoom out
Zoom in
Previous page
1/60
Next page
ADJUSTMENTS AND FLIGHT TECHNIQUES
DUAL RATE
Dual Rate functions allow the modeler to switch servo travel limits in flight, thus varying
the control sensitivity for different flight conditions or maneuvers.
• Dual Rate functions are available on CH1 (Aileron), CH2 (Elevator), and CH4 (Rudder).
• Dual Rate ON (Low Rate) limits can be adjusted from 30% to 100% of full throw.
If
servo
travel
is
reduced by
ATV,
the D/R ON throw
will
be
30%
to
100% of the
limit
set
by
ATV
(in
D/R OFF). If AFR is used, the D/R ON limit is unaffected, and will be 30% to 110% of normal (full)
throw.
• Dual Rate ON limits can be adjusted independently in each direction from neutral.
•There are three D/R ON/OFF Switches. Control of the three D/R functions can be assigned to these
switches in any combination the modeler desires, or D/R functions can be switched ON and OFF auto-
matically according to the position of the Throttle stick.
•The
ON/OFF directions
of
the
D/R
Switches can
be
reversed
using
the
PARAMETERS program screen
(See page 43).
In the AUTO D/R mode, the D/R functions can be turned ON and OFF according to the position
(adjustable) of the throttle stick.
•The
Trimmer
Panel
has
D/R
sub trimmers for CH1 (AIL) and CH2 (ELV). The D/R ON limits
can
be
trimmed ± 25% of the amount set on the screen using these trimmers. The characters in ( ) on the far
right
side
of
the
screen
(CH1 and CH2
only)
indicate
the
actual
set
amount
(the
amount
set
with
the
program keys ± the sub trimmer setting).
Setting Method
1) Select the EDIT screen, then select the DUAL
RATE screen with the program key.
2) Select the channel to be set with the
or
cursor key.
3) Move the cursor to the
position with the
or cursor key and press the or
program key to activate or deactivate the
D/R function for that channel.
key is pressed, "ON"or "OFF"
will be displayed in the "INH" position, de-
pending upon the position of the pertinent
D/R ON/OFF switch.
and cursor keys, move the
cursor to the L/D or R/U position and set
the
desired D/R ON throw with the or
program keys. Pressing the pro-
gram key will return the set limit to 100%.
100%.
"sw" position with the or key and
selecting switch No. 1, 2, or 3 with the
,or
program key.
4) When the
The D/R ON/OFF Switches are designated
by
numbers as follows:
1 ... Aileron D/R
As designated on the
transmitter front.
2 ... Elevator D/R
3... Rudder D/R
Each switch may be used to control one, two, or
all three D/R functions as desired.
7) Field adjustment of the D/R ON limits is
convenient using the AIL and ELE. D/R sub
trimmers on the trimmer panel. The adjust-
ment range is ± 25% of the amount set with
the program keys. A tone will sound at the
neutral (sub trim amount = 0) position of
each sub trimmer.
5) Using the
6) Select the desired ON/OFF Switch for each
D/R function by movinq the cursor to the
[18]
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 9VAP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 9VAP in the language / languages: English as an attachment in your email.

The manual is 3,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info