29003
13
Zoom out
Zoom in
Previous page
1/101
Next page
10
1. Connect the transmitter charging jack and airborne Ni-Cd batteries to the
transmitter and receiver connectors of the charger.
2. Plug the charger into a wall socket.
3. Check that the charger LED lights. The batteries should be left on charge for
about 15 hours when recharging the standard NR-4RB and NT8S600B Ni-Cd
batteries.
Only charge the batteries with the charger supplied with your system. The
use of a fast charger may damage the batteries by overheating and dramatically
reduce their lifetime.
You should fully discharge your system’s batteries periodically to prevent a
condition called “memory.” For example, if you only make two flights each
session, or you regularly use only a small amount of the batteries’ capacity, the
memory effect can reduce the actual capacity even if the battery is fully charged. You
can cycle your batteries with a commercial cycling unit, or by leaving the system on
and exercising the servos by moving the transmitter sticks. Cycling should be done
every four to eight weeks, even during the winter or periods of long storage. Keep
track of the batteries’ capacity during cycling; if there is a noticeable change, you
may need to replace the batteries.
You may change the length of the control sticks to
make your transmitter more comfortable to hold and
operate. To lengthen or shorten your transmitter’s
sticks, first unlock the stick tip by holding locking
piece B and turning stick tip A counterclockwise.
Next, move the locking piece B up or down (to lengthen or shorten). When the
length feels comfortable, lock the position by turning locking piece B
counterclockwise.
Charger
TX: Transmitter charging indicator
RX: Receiver charging indicator
To transmitter charging jack
Receiver Ni-Cd battery
Stick tip A Locking piece B
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 8UHPS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 8UHPS in the language / languages: English as an attachment in your email.

The manual is 4,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info