747936
55
Zoom out
Zoom in
Previous page
1/163
Next page
Fail safe mode selection
- Select with the (+) or (-) but-
tons.
Battery fail safe function
OFF, ON
Initial value: OFF
Setup item selection
- Select by (JOG) button up or
down operation.
Fail safe position setup button
- The (JOG) button are pressed
simultaneously for about 1 sec-
ond.
Fail safe mode
Off, Hold, Fail-safe
55
Function
Fail Safe/Battery Fail Safe Function
1
(Battery fail safe function ON/OFF)
Select "OFF" or "ON" of "B-F/S" by (JOG) button opera-
tion. Set B-F/S function ON/OFF by (+) or (-) button.
2
(Battery fail safe voltage setting)
Select battery fail safe **V at the bot-
tom of the screen by (JOG) button op-
eration. Set the voltage that turns on
the B-F/S function by (+) or (-) button.
(Since R604 Series receivers are not for high voltage use,
the use of LiFe and Li-Po batteries is prohibited. There-
fore, the 4.8v and 5.6v settings are prohibited.)
3
When finished with setting, return to the menu screen by
pressing the (END) button.
Battery fail safe function ON/OFF & BATT-F/S voltage setting
BATT-F/S Voltage
T-FHSS
3.5,3.8,4.0,4.2,4.4,4.6,4.8,5.0,
5.3,5.6,5.9,6.2,6.5,6.8,7.1,7.4V
FASST
3.5,3.8,4.4,4.75
5.5V
(
Only R614
)
S-FHSS
Only 3.8V
Example:
Ni-MH /Ni-Cd 4cell---3.8V
Ni-MH /Ni-Cd 6cell---4.4V
LiFe 2cell---4.8V
Li-Po 2cell---5.6V
When the receiver power supply of an electric car uses a common power supply from an ESC, we recommend that this function be set
to OFF because the voltage supplied to the receiver may drop momentarily and the battery fail safe function may be activated.
(Preparation)
- Select the channel to be set by (JOG) button operation.
1
(Mode selection)
Select the mode by (+) or (-) button.
(Each channel can be individually set.)
Fail safe mode selection
1
(Servo position setup)
When the fail safe function operates, select the channel’s
"Position" to be set by (JOG) button operation.
The steering wheel, the throttle trigger or 3rd, 4th channels
dial remains in the desired operation position. When the (JOG)
button are pressed simultaneously for about 1 second, the
servo position is displayed and you can confirm that the func-
tion was set.
(Each channel can be set similarly.)
2
When finished with setting, return to the HOME screen by
pressing the (END) button.
Fail safe function setup
2
When finished with hold or off mode setting, return to the HOME screen by pressing the
(END) button. When setting fail safe, set the servo position by the following method.
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 4PX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 4PX in the language / languages: English as an attachment in your email.

The manual is 10,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info