747936
53
Zoom out
Zoom in
Previous page
1/163
Next page
Brake2
B
ra
k
e2 Brake3
B
ra
k
e3 Brake2 & 3
B
ra
k
e2
&
3
53
Function
Acceleration (Throttle Acceleration)
(Preparation)
- Select the setting item "Forward" by (JOG) button up or down
operation and make the following adjustments:
1
(Forward acceleration amount adjustment)
Use the (+) and (-) buttons to adjust the acceleration amount.
"0" :No acceleration
"100" :
Maximum acceleration (Approximately 1/2 of the forward side throttle angle)
2
(Brake side acceleration amount adjustment)
Select the setting item "Brake1" by (JOG) button up or down
operation and use the (+) and (-) buttons to adjust the accel-
eration amount.
"0" :No acceleration
"100" :Maximum acceleration (Brake side maximum throttle angle)
3
(3rd & 4th channel brake side acceleration amount adjustment)
If the "Brake Mixing Function" (p.80) is being set, the 3rd or 4th
channel brake side acceleration will become adjustable.
Select the setting item "Brake 2" or "Brake3" by (JOG) button
up or down operation and adjust acceleration amount by (+) or
(-) button.
"0" :No acceleration
"100" :Maximum acceleration (Brake side maximum throttle angle)
Throttle acceleration adjustment
The throttle acceleration adjustment amount (Forward), (Brake1), 3rd channel and 4th
channel (Brake2, Brake3) can be controlled with digital trim DT1-DT6 or digital dial
DL1 etc. with the dial select function. (p.101)
Dial / Trim Setting
Adjustment buttons
Adjust with the (+) and (-) but-
tons.
- Return to the initial value "0" by
pressing the (+) and (-) buttons
simultaneously for about 1 sec-
ond.
Forward acceleration amount
(Forward)
0~100
Initial value: 0
Brake side acceleration amount
(Brake1)
0~100
Initial value: 0
3rd/4th channel
brake side
acceleration
amount
(Brake2),(Brake3)
0~100
Initial value: 0
When Trigger Ratio (p.66) was set to 100:0, brake operation is stopped and the throttle
(brake side) cannot be adjusted.
Caution
4
When finished with setting, return to the menu screen by pressing the (END) button.
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 4PX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 4PX in the language / languages: English as an attachment in your email.

The manual is 10,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info